Table of Contents
Advertisement
File Copy ............................. Copies the specified file. When this parameter is selected, a submenu
File Rename ....................... Renames the specified file. When this parameter is selected, a
File Delete ........................... Deletes the specified file. When this parameter is selected, a submenu
Card Initialize ...................... Reformats the PCMCIA card.
PC Card Information ........... Displays the volume of data on the PC card. No settings can be made
CHECKPOINT
• The file extensions used are as follows.
[*****.CND]:
[*****+CRNT.GBD]: CRNT (Current) binary file data
[*****+EV**.GBD]: EVNT (Event) binary file data
[*****+CRNT.CSV]: CRNT (Current) text file data
• If a User file name that is the same as the name of an existing file is specified, "CP" will be added to
the file name.
[*****_CP+CRNT.GBD]
• If data capture was made using the same file, the file will be saved as the original file name (up to 100
characters) with +CP added. For subsequent data capture operations, data will be saved to the last
file (a 100-character file) by overwriting the existing data.
[***_rep***+CRNT.GBD]: captured data when On was selected for Repeat (Current Binary file data)
[***_rep***+EV**.GBD]: captured data when On was selected for Repeat (Event Binary file data)
• The file save destinations for current and event data will the locations specified as the data save
destinations in the FILE menu.
CAUTION
Do not remove the PCMCIA card from the GL500 during a file operation. The GL500 may malfunction if
the card is removed at this time.
appears for specifying the source file and the destination file.
submenu appears for selecting the file you wish to rename and its new
file name.
appears for selecting the name of the file to be deleted.
Format: Select from Super floppy and HDD-compatible format
Type:
Select Quick Format or Normal Format
Volume Label:
This parameter specifies the volume label of the card to be
reformatted. Specify a volume label of up to 11 characters.
here.
Setting parameters file
EV** (Event) memory block number
Settings and Measurement
3-27
Advertisement
Table of Contents
