Capturing; Dual View Replaying - GRAPHTEC gl820 User Manual

(2) Capturing

Time of Capturing
Capture file name
During data capture, data is captured into the Internal memory or USB device.
You cannot use the MENU key to change the setting.
Operations available during capture
SPAN/TRACE/POSITION
Display mode
Dual View replay
Save to device
Setting check
Time axis change

(3) Dual View Replaying

Screen buffer usage rate (orange line)
You can replay data during capture.
Waveform on the right side is the current captured data and the left side is previously captureddata. You
can use the Direction keys (
Operations available during dual view replaying
Moving cursor
Save to device
Screen copy
Capture time
Note: "+++++:++:++" is displayed when the capture time is long.
The SPAN/TRACE/POSITION key is used to change settings.
The DISPLAY key is used to change the display mode.
The REVIEW key is used to replay captured data in two windows
at the same time.
While data is replayed in two windows, the FILE key is used to
save data to a device.
The MENU key is used to change the settings.
The TIME/DIV key is used to change the time axis.
Displays the voltage at a point indicated by
Cursor A or B or the selected cursor.
Displays the measurement time at a point
indicated by Cursor A or B or the selected cursor.
) to move the cursor to captured data to check digital values.
The CURSOR key is used to switch between cursors A and B.
The or
The FILE menu is used to save data to a device.(During capture, data up
to the present or data between cursors can be saved to a separate file.
While capture to the internal memory is in progress, use this feature to
save data to USB memory without stopping capture.)
The FILE menu is used to copy the screen.
CHAPTER 3 Settings and Measurement
keys are used to move the cursors.
3−15