Range/Span/Position Key - GRAPHTEC GL500 User Manual

2. RANGE/SPAN/POSITION key

These settings can be made or changed for each channel individually, even while the GL500 is
running or performing measurement.
CHECKPOINT
The monitor is used for monitoring the measurement status only, and its settings cannot be changed. In
addition, the RANGE setting can only be changed if data has not been captured.
Selecting the Parameters
Press the RANGE/SPAN/POSITION key to switch through the setting screens. Each time the key is
pressed, the screen changes.
Waveform + Digital
Display Screen
(for monitoring
measurement only)
Waveform + Digital
Display Screen
Setting Procedure
Use the direction keys to move to the setting parameter and to make selections (settings).
QUIT
LOCAL
ENTER
Select (Set)
RANGE settings
The voltage and temperature settings vary according to the settings made in the MENU (AMP)
screen.
• Voltage
100 • 500 mV • 1 • 5 • 10 • 50 • 100 V
4VF/4MF:
100 • 500 mV • 1 • 5 • 10 V
8MS:
• Temperature
TC-K • TC-J • TC-T • TC-R • TC-E • TC-B • TC-S • TC-N • TC-W
4VF/8MS:
RANGE Settings Screen
(only when data has not
been captured)
RANGE Settings Screen
MENU
CH settings
SPAN Settings Screen
SPAN Settings Screen POSITION Settings Screen
Settings and Measurement
POSITION
Settings Screen
3-3