Data Capture: How To Capture Data - GRAPHTEC GL900 Quick Start Manual

3. Data Capture: How to Capture Data

Now that all the data capture settings have been made, we will start actual data capture.
During the data capture operation, let's also replay some data that was captured previously.
1. Starting data capture
(1) Press the START/STOP key.
(2) A confirmation message is displayed.
(3) Press the ENTER key to start data capture.
2. Screen status during data capture
Once data capture has started, the elapsed time and the allowable data capture
time are counted.
capturing message
elapsed time
allowable data capture time
Points to
Remember ! Data can be replayed while being captured by pressing the REVIEW key.
Data can be replayed during the data capture operation from the
beginning to the point that has been captured. During the replay, you can
check arbitrary level values and such by moving the cursor. You can
return to the data capture screen by pressing the REVIEW key again.
3. Stopping data capture
Press the START/STOP key to end the data capture operation.
(1) Press the START/STOP key.
(2) A confirmation message is displayed. Press the ENTER key.
(3) Data capture ends, and the GL900 goes into the Free Running status.
This completes the data capture operation.
REVIEW
13