Data Capture: How To Capture Data - GRAPHTEC GL820-UM-851 Quick Start Manual

3. Data Capture: How to Capture Data

All of setting for the data capture have been set, capturing data can be started now.
During the data capture operation, let's also replay some data that was captured previously.
1. Starting data capture
(1) Press the START/STOP key.
(2) A confirmation message is displayed.
(3) Press the ENTER key to start data capture.
2. Screen status during data capture
Once data capture has started, progress of data capture is shown. The displayed
time is counting up or down.
capturing message
elapsed time
Points to
Remember !
Data can be replayed while being captured by pressing the REVIEW key. Data
can be replayed during the data capture operation from the beginning to the
point that has been captured. During the replay, you can check arbitrary level
values and such by moving the cursor. You can return to the data capture
screen by pressing the REVIEW key again.
3. Stopping data capture
Press the START/STOP key to end the data capture operation.
(1) Press the START/STOP key.
(2) A confirmation message is displayed. Press the ENTER key.
(3) Data capture ends, and the GL820 goes into the Free Running status.
The operation of data capture is completed.
remaining time for data capture
(
The indication becomes ++++ when the data capture time is 9999 hours or more.)
REVIEW
13