GRAPHTEC GL500 User Manual page 80

(6) In the "Select the device driver you want to install for this hardware." window, click "Have Disk".
(7) In the "Locate File" window, browse the CD-ROM, select "USB DRIVER" → "GTCUSBR.INF"
and click "Open".
(8) Return to the "Select the device driver..." window and click "Next".
(9) Installing the driver
Windows XP starts installing the driver. Depending on the OS setting, "The software you are
installing for this hardware has not passed Windows Logo Testing to verify its compatibility with
Windows XP" message may appear. Simply click "Continue Anyway".
(10) Completing the Installation
The "Completing the Hardware Update Wizard" window appears. Click "Finish" to exit the wizard.
Windows 2000: Driver software is to be installed for the first time.
Installing the USB driver
(1) Starting the wizard
Connect the USB cable to the PC and the GL500. The "Found New Hardware" wizard appears.
(2) In the "Found New Hardware Wizard" window, select "Search for a suitable driver for my
device (Recommended)" under "What do you want the wizard to do?" and click "Next".
(3) In the "Locate Driver File" window, select "CD-ROM drive" under "Optional search locations"
and click "Next".
(4) Browse the CD-ROM, select "USB DRIVER" → "GTCUSBR.INF" and click "OK".
(5) "The wizard found a driver" message appears. Click "Next".
(6) Completing installation
The "Completing Found New Hardware Wizard" window appears. Click "Finish" to exit the wizard.
Windows 2000: Driver software is already installed.
Updating the USB driver
(1) Opening "Device Manager"
Select "Control Panel" → "System" → "Hardware" tab or right-click "My Computer", select
"Properties" "Hardware" tab "System Properties" window, then click the "Device Manager"
button.
(2) In the "Device Manager" window, open "USB (Universal Serial Bus) Controller". Confirm that
"Graphtec DM/GL/WR Series USB Driver" is shown. Right-click it and select "Properties".
(3) Updating the driver
Select the "Driver" tab and click "Update Driver".
(4) Starting the update wizard
"Upgrade Device Driver Wizard" appears. Click "Next".
(5) In the "Install Hardware Device Drivers" window, select "Display a list of the known drivers for
this device so that I can choose a specific driver." under "What do you want the wizard to do?"
and click "Next".
(6) In the "Select a Device Driver" window, click "Have Disk".
(7) In the "Locate File" window, browse the CD-ROM, select "USB DRIVER" → "GTCUSBR.INF"
and click "OK".
(8) Return to the "Select a Device Driver" window and click "Next".
(9) In the "Start Device Driver Installation" window, click "Next".
(10) Completing installation
The "Completing the Upgrade Device Driver Wizard" window appears. Click "Finish" to exit the
wizard.
Software
4-5