Wireless Network Setup: Connect To Existing Network - QSC TouchMix-30 Pro User Manual

Wireless Network Setup: Connect to Existing Network

IMPORTANT!: Requires an Ethernet
Wi-Fi router and the USB Wi-Fi adapter
(QSC Part # cp-000033-00).
Connecting to an Existing Network
using a USB Wi-Fi dongle provides short range wireless
communication between a TouchMix mixer and a longer
range wireless Ethernet router. The Android and/or iOS
devices with the TouchMix app installed communicate
with the TouchMix via the Ethernet wireless router.
1. Name: – Enter a name for the mixer.
Mixer
2. Type: – Set to Wireless.
Network
3. Select
Connect to Existing
Network.
4. – Enter a known SSID
Network SSID:
of an Ethernet wireless router, or touch Scan.
Select the desired network from the list that
displays.
5. – The mixer searches for, and displays,
Scan
a list of available wireless networks. Select the
desired network.
6. Password: – Enter the password for the
network being joined.
7. – Select the Security setting used
Security:
by the network.
8. Apply – Touch to configure the mixer. External
devices may now log on to the mixer using the
external network Name and Password.
1001108-01-F
Menu Network Wireless
Main Mix
Network Setup
L/R
1
Joe's Monitor
Mixer Name: My TM-30
Aux 1
Aux 2
Aux 2
Aux 3
3
Aux 3
Connect to Existing Network
Aux 4
Aux 4
Aux 5
Aux 5
Network SSID:
Aux 6
Aux 6
Aux 7
Password:
Aux 7
Aux 8
7
Aux 8
Aux 9
Security
Aux 9
Aux 10
Aux 10
Aux 11
Aux 11
Aux 12
Aux 12
Aux 13
Aux 13
Aux 14
Aux 14
113
Touch
Press Menu
Network
2
Network Type: Wireless
Wireless Network Settings
Create New Network
4 5
External Router Scan
6
Password
WPA WPA2
WEP-40
(AES+TKIP) (CCMP)
Signal Strength:
8
Apply
Select a Network:
Found Networks
Wireless ABC
Joe's Network
TM-30 - practice only
Select
Touch
Wireless
Scene:
Default
Wired
Main
Cue
Main
L/R
10 10
5
L
u
AF
5
10
20
0
40
∞
Mute
Cancel