Wired Network Setup: Static Ip Address - QSC TouchMix-30 Pro User Manual

Wired Network Setup: Static IP Address

IMPORTANT!: For
TouchMix-30 Pro, connect an Ethernet
router to the mixer's RJ45 jack.
For TouchMix-8 and TouchMix-16
connect a compatible USB to Ethernet
adapter to the mixer's USB port. (for
compatible adapters, visit qsc.com and
search for "Ethernet".
Using a
Wired Network Setup
a provides wired
Static IP Address
communications between a TouchMix and a wireless
Ethernet router. Make sure there is no other equipment
connected to the same network with the same IP
address.
1. – Enter a name for the
Mixer Name:
network.
2. Type: – Set to Wired.
Network
3. Select
Static IP Address
IP address for the mixer.
4. Enter the Network Address
mixer.
5. Enter the
Network Mask
6. Enter the Gateway Address
7.
Connection Status:
a. Connected – Displays to confirm successful connection to the network. External devices may now login to the mixer using the external
network Name and Password.
b.
No Cable Detected
8. Apply – Touch apply and the mixer will configure the network connections. .
1001108-01-F
Menu
Main Mix
L/R
Joe's Monitor
Aux 1
Aux 2
Aux 2
Aux 3
with
Aux 3
Aux 4
Aux 4
Aux 5
Aux 5
Aux 6
Aux 6
Aux 7
Aux 7
Aux 8
Aux 8
Aux 9
Aux 9
Aux 10
Aux 10
to use a static
Aux 11
Aux 11
Aux 12
for the
Aux 12
Aux 13
Aux 13
Aux 14
Aux 14
– Mixer is not connected to a network.
Network Wired
Network Setup
1
Mixer Name: My TM-30
Wired Network Settings
3
Static IP Address
4
Network Address:
5
Network Mask:
6
Gateway Address:
Connection Status:
114
Touch
Press Menu
Network
2
Network Type: Wireless Wired
Auto IP Address (DHCP)
192.168.1.112
255.255.255.0
192.168.1.254
7
Connected
8
Apply
Touch Wired
Scene:
Default
Main
Cue
Main
L/R
10 10
5
L
u
AF
5
10
20
0
40
∞
Mute