Talkback / Noise - QSC TouchMix-30 Pro User Manual

Talkback / Noise

This screen controls the routing and level of Talkback
and Noise.
1. Restores factory defaults
Reset button –
for the Talkback / Noise Generator.
2.
Assignment buttons –
destination for the noise or talkback signals.
Note that it is possible to route talkback to the
FX devices. This is very useful when auditioning
and selecting effects.
3.
Talkback (Measurement) Mic –
Adjusts the level of the talkback signal to the
assigned outputs. -Inf (Infinity) is off.
4.
Enable (Talkback) –
Talkback, touch again to disable Talkback. Unlike
the mixer's hold-to-talk Talk button, this button
is latching. When enabled, the hold-to-talk
button is illuminated. On tablet devices, both Talk
and Enable are latching.
5. Enables 48V phantom
Mic Phantom –
power to the Talkback microphone input.
6.
Noise Generator –
of the noise signal to the assigned outputs.
-Inf (Infinity) is off.
7. Touch to enable Noise,
Enable (Noise) –
touch again to disable Noise.
1001108-01-F
Menu
Main Mix
Select the
L/R
Joe's Monitor
Aux 1
Aux 2
Aux 2
Aux 3
Aux 3
Aux 4
Aux 4
Aux 5
Aux 5
Touch to enable
Aux 6
Aux 6
Aux 7
Aux 7
Aux 8
Aux 8
Aux 9
Aux 9
Aux 10
Aux 10
Aux 11
Aux 11
Adjusts the level
Aux 12
Aux 12
Aux 13
Aux 13
Aux 14
Aux 14
Talkback FX
Talkback / Noise Generator
Select outputs for Talkback/Noise Generator
Aux 1 Aux 2 Aux 3 Aux 4 Aux 5 Aux 6 Aux 7
2
Joe's
Aux 2 Aux 3 Aux 4 Aux 5 Aux 6 Aux 7
Monitor
FX 1 FX 2 FX 3 FX 4 FX 5 FX 6
2
FX 1 FX 2 FX 3 FX 4 FX 5 FX 6
Talkback
(Measurement)
Mic
-40.0
3
Mic
Phantom
4 5
Enable 48V
110
Press Menu
1
Reset
Aux 8 Aux 9 Aux 10 Aux 11 Aux 12 Aux 13 Aux 14
Aux 8 Aux 9 Aux 10 Aux 11 Aux 12 Aux 13 Aux 14
L/R
2
Main
Noise
Generator
-40.0
6
7
Enable
Touch
Talkback
Scene:
Default