Wizards; Fx Wizard - QSC TouchMix-30 Pro User Manual

Wizards

FX Wizard

The FX Wizard aids in selecting and routing effects.
1. – Selects one of six
FX1 - 6 tabs
FX processors. (Four on TouchMix-8 and
TouchMix-16)
NOTE: The Source, Type, and FX
Preset windows provide a means of
selecting an Effect based on what the
source is. If any of the lists fill the window,
flick up on the list to show more selections.
2. – Use the Source window to
Source list
select the source instrument category.
3. – Use the Type windows to select
Type list
the specific type of instrument. This narrows
the selection to a list of recommended presets
appropriate for the application.
4. – Use the FX Preset window
FX Preset list
to select the Effect and variation. For example,
in the FX Preset window the letter "D" refers to
the Dense Reverb Effect, and the text following
the letter indicates the Preset (variation) of the
Dense Reverb.
5. Recall button – Loads selected effect.
6. – Unassigns all the inputs
Clear button
and outputs.
7.
Select inputs to feed
buttons to apply the effect to an input.
8. Cue button – Touch Cue above the FX fader to hear the output of the selected effect on the Cue system.
9.
Select Aux Output buttons
effect to the associated Aux Output.
1001108-01-F
Wizard
– Each input channel is represented by a button. Touch one or more of these
Label
– Each Aux Output is represented by a button. Touch one or more of these buttons to send the
81
FX Wizard
Touch
Press Wizard
FX Wizard