Copy & Paste - QSC TouchMix-30 Pro User Manual

Copy & Paste
The TouchMix-30 Pro has a powerful but simple copy and paste function that is operated by the U7 (copy) and U8 (paste) buttons (U2 and U3 on
the TouchMix-8 and TouchMix-16). Copy and Paste is context sensitive so that what you are looking at is what will be copied. Only like things may
be copied and pasted from and to each other. For example, a PEQ cannot be pasted to a GEQ. The table below explains what parameters will be
copied and pasted.
NOTE: The copy buffer retains the last item of each type that has been copied. If, for example a GEQ setting is copied and then a
Gate is copied, both will reside in memory. If a GEQ is displayed, Paste will recall the copied GEQ parameters. If a Gate is displayed,
Gate parameters will be pasted.
To copy and paste parameters:
The example above shows the mix that's on Auxiliary 1 copied to Auxiliary 5.
After set-up is complete, it may be useful to clear the Copy/Paste buffer. This will prevent accidentally pasting parameters during the show. To clear
the Copy/Paste memory:
To clear the Copy/Paste buffer:
What's Displayed
Main or Auxiliary Faders View
Input Channel Overview Tab
Input Channel EQ Tab
Input Channel Comp Tab
Input Channel Gate Tab
Input Channel FX Tab
Input Channel Aux Tab
Input Channel Setup Tab
Output Channel Overview Tab
Output Channel PEQ Tab
Output Channel GEQ Tab
Output Channel Anti-Feedback Tab
Output Channel Limiter Tab
Output Channel FX Tab
Output Channel Aux Tab
Output Channel Setup Tab
FX Channel Overview Tab
FX Channel EQ Tab
FX Channel Preset Tab
FX Channel Aux Tab
Sub Group Overview Tab
Sub Group EQ Tab
Sub Group Limiter Tab
Sub Group FX Tab
Sub Group Aux Tab
1001108-01-F
Aux Masters
Clear Copy/Paste
Menu
What will be copied & pasted
Fader and Pan
EQ, Compressor, Gate, FX sends, Aux Sends, Digital Gain, Delay, Group
Assigns, Polarity
All channel EQ parameters
All channel Compressor parameters
All channel Gate parameters
All channel FX send levels
All channel Auxiliary Send levels and Pan positions
Recording Arm, Polarity, Delay, Digital Gain, Group assignments
PEQ, Limiter, FX sends, Aux Sends, Delay, Group Assigns, Polarity, Pick-
Off Point (Auxes only)
All channel PEQ parameters
All channel GEQ parameters
All channel Anti-feedback parameters
All channel Limiter parameters
All channel FX send levels
All channel Auxiliary Send levels and Pan positions
Recording Arm, Polarity, Delay, Digital Gain, Group assignments
Current Preset, EQ, Pick-Off Point, Group Assigns, Polarity
All FX channel EQ parameters
Processor and Preset selection, FX Returns and Pans to Aux
All FX Channel Auxiliary Send levels and Pan positions
PEQ, Limiter, FX sends, Aux Sends, Group Assigns
All Sub Group PEQ parameters
All Sub Group Limiter parameters
All Sub Group FX send levels
All Sub Group Auxiliary Send levels and Pan positions
20
Copy
Aux 1 Aux 5
U7
Yes
Paste
U8