Sub Group − Peq - QSC TouchMix-30 Pro User Manual

Sub Group − PEQ
(TouchMix-30 Pro only)
Controls and displays the settings for the Sub Group
parametric equalization.
1. Selects the PEQ screen.
EQ tab –
2.
PEQ In/Out switch –
disengages the equalizer.
NOTE: When the RTA is off, the
Parametric EQ graph expands to use the
entire graph area.
3. RTA On button – Turns the RTA (Real-
time Analyzer) on and off.
4. Hides the Low Cut, High
Simple button –
Cut, Frequency, and BW controls. Does not effect
existing settings.
5. Sets all EQ controls to
Reset button –
factory default values.
6. Displays the amplitude of the
RTA graph –
channel signal in 1/3 octave bands. Peak hold is
displayed only on tablet devices.
7.
Parametric EQ graph –
representation of the equalization curve based
on the EQ settings. The trace dims to indicate
that the EQ is Out (disengaged).
•
EQ graph vertical scale
• EQ graph horizontal scale
8. EQ Handles – Touch, hold, and drag to change the Frequency and Gain of the associated EQ band. The frequency band button
must be engaged to see the EQ Handles.
9.
Low and High Cut Filter buttons –
Freq control.
10.
Low and High Shelf Filter buttons –
shelf filter is engaged, the Bandwidth control is not available.
11.
Frequency Bands 1 - 6 In/Out –
12. Adjusts and displays the gain at the frequency setting of the associated EQ band. Range of -15 dB to +15 dB.
Gain knob –
13. Adjusts and displays the center frequency of the associated EQ band. The range is 20 Hz to 20 kHz for all bands. If the
Freq knob –
Shelving filter is engaged, the Freq control sets the knee frequency of the shelf filter.
14. Q knob – Adjusts the bandwidth of the associated EQ band. When the Shelf Filter is selected, the Bandwidth control is hidden. In
addition to the Q knob, you can use a two-finger pinch / zoom to control the Q.
15. (Low and High Cut) – Sets the knee frequency of the low and/or high cut filter as measured from a point 3 dB below 0 or
Freq knob
unity.
16. Navigates to the next or previous sub group. The buttons cycle through the Input, Playback, Record, and FX
buttons –
channels, then loops back to Input 1.
17. Sub Group controls –
18. controls – Output controls for the Main L/R outputs. See Channel Controls topic.
Main Channel
1001108-01-F
Main Mix
L/R
Engages /
Joe's Ears
Aux 1
Aux 2
Aux 2
Aux 3
Aux 3
Aux 4
Aux 4
Aux 5
Aux 5
Aux 6
Aux 6
Aux 7
Aux 7
Aux 8
Aux 8
Aux 9
Aux 9
Aux 10
Aux 10
Aux 11
Aux 11
Aux 12
Aux 12
Aux 13
Aux 13
A graphic
Aux 14
Aux 14
– Represents audio level from -20 dB to +20 dB.
– Represents frequency from 20 Hz to 20 kHz.
These filters cut frequencies below or above the frequency set by the corresponding
Changes EQ Band 1 and Band 6 from parametric filters to shelving filters. When a
Engages / disengages the associated parametric EQ band.
Output controls for selected Sub Group.
Press
Home
Sub Groups
Sub 1 EQ
Inputs 1-8
1
Overview EQ Comp
2
PEQ
Out In
6
-5
-15
-30
-45
-60
31.5
7
1
2
3
20Hz
9 10
11
1 2 3
12 Gain Gain Gain
Low Cut
0.00 0.00 0.00
dB dB dB dB
15 Freq
13
Freq Freq Freq
120
80.0 200 500
Hz Hz Hz Hz
14
Q Q Q
Hz
1.00 1.00 1.00
62
Touch a Sub Touch a
Group Bank Sub Group
FX Auxes Presets Setup
Prev
3 4 5
Sub 1
RTA On Simple Reset
-5
-15
-30
L
-45
Sub
1
C
5 6
F
8
0
4
10 9
0
4 5 6
Gain Gain Gain
High Cut
0.00 0.00 0.00
1
dB dB
3
15 Freq
Freq Freq Freq
5
8.0K
1.00k 3.0k 8.0k
7
Hz Hz
Q Q Q
Hz
1.00 1.00 1.00
Touch the
EQ Tab
Scene:
16
Default
Next
Main
17 18
Cue Cue
C R
Main
L/R
10 10
10 10
5
5
L
u
u
AF
5
5
10
10
20
20 0
LR
40 40
2
4
∞
6
8
Mute Mute