Output Channel − Peq - QSC TouchMix-30 Pro User Manual

Output Channel − PEQ
Controls and displays the settings for the Main or
Auxiliary output parametric equalization.
1. – Selects the PEQ screen.
PEQ tab
2. PEQ In/Out switch
disengages the equalizer.
3. Turns the RTA (Real-
RTA On button –
time Analyzer) on and off.
NOTE: When the RTA is off, the
Parametric EQ graph expands to use the
entire graph area.
4. – Hides the Low Cut, High
Simple button
Cut, Frequency, and BW controls. Does not effect
existing settings.
5. – Sets all EQ controls to
Reset button
factory default values.
6. – Displays the amplitude of the
RTA graph
channel signal in 1/3 octave bands. Peak hold is
displayed only on tablet devices.
7. Parametric EQ graph
representation of the equalization curve based
on the EQ settings. The trace dims to indicate
that the EQ is Out (disengaged).
• EQ Graph vertical scale
Represents audio level from -20 dB to +20 dB.
• EQ Graph horizontal scale
8. Touch, hold, and drag to change the Frequency and Gain of the associated EQ band. The frequency band button
EQ Handles –
must be engaged to see the EQ Handles.
9.
Low and High Cut Filter buttons
Freq control.
10.
Low and High Shelf Filter buttons
shelf filter is engaged, the Bandwidth control is not available.
11.
Frequency Bands 1 - 6 In/Out buttons –
12. Gain knob – Adjusts and displays the gain at the frequency setting of the associated EQ band. Range of -15 dB to +15 dB.
13. Adjusts and displays the center frequency of the associated EQ band. The range is 20 Hz to 20 kHz for all bands. If the
Freq knob –
Shelving filter is engaged, the Freq control sets the knee frequency of the shelf filter.
14. Q knob – Adjusts the bandwidth of the associated EQ band. When the Shelf Filter is selected, the Bandwidth control is hidden. Q may
also be adjusted by "pinching" (TouchMix-30 Pro and tablet apps only).
15. (Low and High Cut) – Sets the knee frequency of the low and/or high cut filter as measured from a point 3 dB below 0 or
Freq knob
unity.
16.
Prev / Next buttons
channels, then loops back to Input 1.
17. Channel controls
18. controls – Output controls for the Main L/R outputs. See Channel Controls topic.
Main Channel
1001108-01-F
– Engages /
Main Mix
L/R
Joe's Monitor
Aux 1
Aux 2
Aux 2
Aux 3
Aux 3
Aux 4
Aux 4
Aux 5
Aux 5
Aux 6
Aux 6
Aux 7
Aux 7
Aux 8
Aux 8
Aux 9
Aux 9
Aux 10
Aux 10
Aux 11
Aux 11
– A graphic
Aux 12
Aux 12
Aux 13
Aux 13
Aux 14
Aux 14
–
– Represents frequency from 20 Hz to 20 kHz.
– These filters cut frequencies below or above the frequency set by the corresponding
– Changes EQ Band 1 and Band 6 from parametric filters to shelving filters. When a
– Navigates to the next or previous channel. The buttons cycle through the Input, Playback, Record, and FX
– Output controls for selected channel. See Channel Controls topic.
Home
Aux Outputs1-8
Aux 1 PEQ
Inputs 1-8
1
Anti-
Overview PEQ GEQ
Feedback
2
PEQ
Out In
6
7
1
8
2
9 20Hz 50 100 200
10
1 2 3
12
Gain Gain Gain
Low Cut
0.00 0.00 0.00
dB dB dB
15
Freq 13
Freq Freq Freq
120
80.0 200 500
Hz Hz Hz
14
Q Q
Hz
1.00 1.00 1.00
Engages / disengages the associated parametric EQ band.
53
Touch an Aux Touch an
Bank Aux Channel
Comp Auxes Presets Setup
3 4 5
RTA On Simple Reset
3
5
4
6
500 1K 2K 5K 10 10K 20K 9
11
4 5 6
Gain Gain Gain
High Cut
0.00 0.00 0.00
dB dB dB
15
Freq
Freq Freq Freq
8.0K
1.00k 3.0k 8.0k
Hz Hz Hz
Q Q Q Q
Hz
1.00 1.00 1.00
Touch the
PEQ Tab
16 Scene:
Default
Prev Next
Joe's Monitor Main
17 18
Cue Cue
L C R
Aux Main
1 L/R
10 10
10 10
5
5
C L
u
u
F
F
5
5
10
10
20
0 20 0
LR
40 40
1 2
3 4
∞
5 6
7 8
Mute Mute