Connecting Remote Devices; Create A Touchmix Network; Connect To An Existing Network - QSC TouchMix-8 User Manual

Connecting Remote Devices

There are several ways to connect your wireless devices to TouchMix using the included Wi-Fi dongle or an external Wi-Fi router. See "Remote Control
Settings" for more detail on allowing or restricting access by remote devices.
Create Own (TouchMix) Network
Direct wireless connection between TouchMix and your devices.
Make sure the provided USB Wi-Fi adapter is installed in one of the mixer's USB ports.
To Create your own network:
Edit Settings for: Wireless
Network Mode:
Create your own network
If desired enter a new Mixer Name and Network Password.
NOTE!: The Network Name is constrained to ten characters available on the "Mixer Name" keyboard. The Password must be numeric
and must contain ten digits.
Apply
Touch
When the mixer is connected, a confirmation message displays.
You can now connect your wireless device using the mixer's name (Network SSID) and Network Password.
ireless Connection to Existing Network
When this method is used, TouchMix uses a wireless connection to an external router. Wi-Fi devices connect to TouchMix via the external router. Make
sure the provided USB Wi-Fi adapter is installed in one of the mixer's USB ports.
To Connect to an existing wireless network:
Edit Settings for: Wireless
Network Mode:

Connect to an existing network

If desired enter a new Mixer Name.
The Network SSID (name) and Password are set on the network to which you are connecting.
Scan...
Touch the button to select the network from a list of available wireless networks. Or, click in the Network SSID field and enter
the network name
Enter the
enter password
Apply
Touch When the mixer is connected to the network, a confirmation message displays.
You can now connect your wireless device using the existing network's name (Network SSID) and Password.
TD-000472-00-B
Menu Mixer Setup
Mixer Setup
Menu
for the network.
Network Setup
Network Setup
10