Input Channel − Setup - QSC TouchMix-30 Pro User Manual

Input Channel − Setup
Channel Setup is provided for all input channels. Line
input channels do not have Phantom power controls.
1. – Selects the Setup screen
Setup
2. Name – Displays the name of the channel.
Touch to display a keyboard and rename the
channel.
3. – Links adjacent channels. The odd
Link
numbered channel settings are copied to
the even numbered channel. Pan settings
are mirrored. Only odd > even pairings are
supported – even > odd pairings are not.
4. Reset – Resets the controls for this channel
to factory defaults.
5.
Playback and Recording
When one of these buttons is engaged, the other is not
displayed. The example above is for illustration only.
• Digital Input – (TouchMix-30 Pro only)
Selects the channel's analog or digital input as
the signal source. The digital source may be
from a USB recording session or from a DAW
(see Rec/Playback for more information). Green
= digital, gray = analog.
• (Arm) – When engaged, the
Recording
audio on this channel will be recorded on the
USB Drive. Available only when the External Recording & Playback Mode is set to Multitrack USB Drive.
6. – Touch to change polarity of the channel output.
Polarity
7. – Turns 48V phantom power on/off for the channel (microphone inputs only).
Mic Phantom
8.
Patch Matrix Channel –
channel has been patched to this channel, the field would display the patched channel's number.
9. – Delays the input signal from 0.00 to 100 milliseconds. Touch the In button to activate the delay.
Delay
10.
Channel Safe During Scene Recall –
a Scene is recalled.
11. – Applies +/- 15 dB of digital gain to the channel signal independently of the channel's analog gain trim. The setting of
Digital Gain
this control is stored and recalled with a scene or preset. When Track is selected as the source, the control applies to the digital input.
12. Main L/R – Assigns the channel's output to the Main Left / Right mix. The factory default is on – assigned to Main L/R.
13. – (1 through 8 – TouchMix-30 Pro only) – Assigns the output of the channel to one or more of the eight Sub Groups.
Sub Groups
User-assigned names display on the buttons. See the Sub Groups topic.
14. (1 through 8) – Assigns the channel to DCA Groups. User-assigned DCA Group names display on the buttons. See the
DCA Group
DCA Groups topic.
15. (1 through 8) – Assigns the channel to Mute Groups. User-assigned Mute Group names display on the buttons. See
Mute Groups
the Mute Groups topic.
1001108-01-F
Inputs 1-8
Inputs 1-8
Main Mix
L/R
Overview
2
Joe's Ears
Aux 1
Banjo
Aux 2
Aux 2
Digital Input
Aux 3
Aux 3
Aux 4
Aux 4
Aux 5
Aux 5
Aux 6
Aux 6
Aux 7
Aux 7
Aux 8
Assignments
Aux 8
Aux 9
Aux 9
Sub 1
13
Aux 10
Yellow
Aux 10
Aux 11
Aux 11
DCA 1
14
Aux 12
DCA 1
Aux 12
Aux 13
Mute 1
Aux 13
15
Aux 14
Band
Aux 14
(TouchMix-30 Pro only) Displays the current setting for this channel in the Patch Matrix. If another
Setting this switch to Safe, protects the channel controls from being changed when
50
Touch an
Home
Input Bank
In 1 Setup
EQ Comp Gate FX
3
5 Recording Polarity
6
Track Arm Normal Reverse
Units
10
Channel Safe
9 Delay
0.00 feet
During Scene Recall
In In
0.00 ms
Recallable
0.00 meters
12
Main L/R
Sub 2 Sub 3 Sub 4 Sub 5
Sub 2 Sub 3 Sub 4 Sub 5
DCA 2 DCA 3 DCA 4 DCA 5
DCA 2 DCA 3 DRUMS DCA 5
Mute 2 Mute 3 Mute 4 Mute 5
Mute 2 Mute 3 Mute 4 Mute 5
Touch the
Touch a
Channel
1
Auxes Presets Setup
Prev Next
2
4
Banjo
Link Reset
Mic Phantom Patch Matrix Channel
7 8
Cue
48V In 1
L C R
Mic
11
Digital Gain
1
1.00 dB
Safe
10 10
5
L
u
G
5
48
10
Sub 6 Sub 7 Sub 8
0 20
Sub 6 Sub 7 Sub 8
DCA 6 DCA 7 DCA 8
LR
40
1 2
DCA 6 DCA 7 DCA 8
3 4
5 6
7 8
Mute 6 Mute 7 Mute 8
Mute 6 Mute 7 Mute 8
Mute
Setup
Tab
Scene:
Default
Main
Cue
Main
L/R
10 10
5
L
u
F
5
10
20
0
40
∞
Mute