Feature Add-Ons - peplink Pepwave MAX 700 User Manual

found at System>Configuration. Note that available options vary by model.
Restore
Configuration to
Factory Settings
Download Active
Configurations
Upload
Configurations
Upload
Configurations
from High
Availability Pair

26.11 Feature Add-ons

Some Pepwave routers have features that can be activated upon purchase. Once the purchase
is complete, you will receive an activation key. Enter the key in the Activation Key field, click
Activate, and then click Apply Changes.
https://www.peplink.com
Configuration
The Restore Factory Settings button is to reset the configuration to factory default
settings. After clicking the button, you will need to click the Apply Changes button
on the top right corner to make the settings effective.
Click Download to backup the current active settings.
To restore or change settings based on a configuration file, click Choose File to
locate the configuration file on the local computer, and then click Upload. The new
settings can then be applied by clicking the Apply Changes button on the page
header, or you can cancel the procedure by pressing discard on the main page of
the web admin interface.
In a high availability (HA) configuration, a Pepwave router can quickly load the
configuration of its HA counterpart. To do so, click the Upload button. After loading
the settings, configure the LAN IP address of the Pepwave router so that it is
different from the HA counterpart.
249 Copyright @ 2021 Pepwave