Open the latches on the cradle.
2.
Place the server in a vertical position with the rear panel facing the cradle latches.
3.
Attach the server to the cradle:
4.
Insert the two hooks on the right side of the cradle into the corresponding openings on the bottom
a.
of the server.
Align and insert the two posts on the cradle into the corresponding openings on the bottom of the
b.
server.
Close the latches on the cradle.
c.
Install the server in the wall mount
Place the server in a vertical position with the rear panel facing the cradle latches.
1.
Insert the two hooks on the bottom side of the wall mount into the corresponding openings on the
2.
server.
Align and insert the two posts on the wall mount into the corresponding openings on the server.
3.
Removal and replacement procedures 35