Table of Contents
Advertisement
Position
S4
S5
S6
S7, S8, S9, S10,
S11, and S12
You can access the redundant ROM by setting S1, S5, and S6 to On.
When the system maintenance S6 switch is set to the On position, the system will erase all system
configuration settings from both CMOS and NVRAM on the next reboot. Clearing CMOS, NVRAM, or both
delete configuration information. Be sure to configure the server properly to prevent data loss.
Drive numbering
•
Drive numbering for the server
•
Drive numbering for the storage expansion unit
Default
Function
Reserved
Off
Off
Off = Power-on password is enabled.
On = Power-on password is disabled.
Off
Off = No function
On = ROM reads system configuration as
invalid.
—
Reserved
Component identification 57
Advertisement
Table of Contents
