Remove The Access Panel; Remove The Communication Board - HPE ProLiant EC200a Maintenance And Service Manual

Remove the server from the storage expansion unit.
e.

Remove the access panel

Before you perform this procedure, make sure that you have a No. 2 Phillips screwdriver available.
Loosen the captive screws.
1.
Slide the access panel toward the front of the server, and then lift it from the server.
2.

Remove the communication board

Before you perform this procedure, make sure that you have a No. 2 Phillips screwdriver available.
Remove the RJ-45 port bracket.
1.
Removal and replacement procedures 23