Mute Mode; Using The Thermometer; Measuring Surface Temperature; Power Off - MasterCool 52225-MED Operating Instructions Manual

Surface temperature
Surface temperature
à Please see the "Use of the thermometer" section to learn how to measure the body
temperature.
Temperature indicator
The surface mode shows the actual and unadjusted surface temperature which is different from
the body temperature. It can help you monitor if the object temperature is suitable for the baby
˚F / ˚C: In "power off" mode, press and hold the "START" button, then press the "ON/MEM" button for 3
Temperature
Temperature indicator
or patient, for example the baby's milk.
Memory locations
seconds, the "˚F" icon will be switched to the "˚C" icon. You can also use the same process to change
à Please see the "Use of the thermometer" section to learn how to measure the object
temperature.
the LCD display from ˚C to ˚F.
Memory locations
Memory locations
If the thermometer detects a temperature ≧99.5°F (or 37.5°C) under forehead mode, three
NOTE: Memory clear and celsius/fahrenheit switch are together. When you switch celsius and
indicator
short beep sound will follow one long beep sound to warn the user for the temperature is above
°F / °C switch
fahrenheit, the memory will be cleared.
99.5°F (37.5°C).
°F / °C switch
°F / °C switch There are total 25 sets of measurement condition for body temperature.
à When power on, press the "ON/MEM" button to see the temperature records with

MUTE MODE:

In "Power Off" mode, press and hold the "START" button, then press the "ON/MEM" button for
The device is set with the sound on, you can set the sound on/off under mute mode.
Mute mode
3 seconds, icon "°F" will be switched to icon "°C". You can also use the same process to
When power is on, press and hold the "ON/MEM" button for 3 seconds. The
change the LCD display from °C to °F.
NOTE: Memory clear and Celsius/Fahrenheit switch are together. When you switch Celsius and
Mute mode
Mute mode
the LCD screen and then release the "ON/MEM" button to set mute. Thus you will not hear the beep
Fahrenheit, the Memory will be cleared.
icon.
sounds. You can also use the same process to turn off the mute function.
The device setting with buzzer is on, you can set buzzer on/off under Mute mode.
Use of the thermometer
Note: If there is any temperature difference between the places where the device is stored and where you are going to measure, subject and the device should
NOTE: If you keep pressing "ON/MEN" button for 2 seconds after When power on, press and hold the "ON/MEM" button for 3 seconds. The icon
stay in the same room for at least 15 minutes before measurement. the LCD screen and then release the "ON/MEM" button to set MUTE. Thus you will not hear Use of the thermometer
Use of the thermometer
powered off WITHOUT setting mute.
1. Always make sure the probe lens is clean without any damage and the forehead is clean.
beep sounds. You can also use the same process to turn off the Mute function.
Note: If there is any temperature difference between the places where the device is stored and where you are going to measure, subject and the device shou
Note: If there is any temperature difference between the places where the device is stored and where you are going to measure, subject and the device should
NOTE: If keep pressing "ON/MEN" button for 2 seconds after stay in the same room for at least 15 minutes before measurement.
Warning: Choking from swallowing small parts and batteries by children or pets is possible, please keep small parts and batteries at places where
stay in the same room for at least 15 minutes before measurement.
1. Always make sure the probe lens is clean without any damage and the forehead is clean. be power off WITHOUT setting Mute.
children and pets can't reach.
1. Always make sure the probe lens is clean without any damage and the forehead is clean.

USING THE THERMOMETER

2. Power on:
Warning: Choking from swallowing small parts and batteries by children or pets is possible, please keep small parts and batteries at places where
Warning: Choking from swallowing small parts and batteries by children or pets is possible, please keep small parts and batteries at places where
will flash on
Press the "ON/MEM" button (see figure 1).
children and pets can't reach.
NOTE: If there is any temperature difference between the places where the device is stored and where you are going to
2. Power on:
2. Power on:
3. Measuring body temperature on the forehead:
stay in the same room for at least 15 minutes before measurement.
measure, subject and the device should stay in the same room for at least 15 minutes before measurement.
Press the "ON/MEM" button (see figure 1).
Press the "ON/MEM" button (see figure 1).
1. Always make sure the probe lens is clean and without any damage and that the forehead is clean.
3. Measuring body temperature on the forehead:
3. Measuring body temperature on the forehead:
Warning: Choking from swallowing small parts and batteries by children or pets is possible, please keep small parts and batteries at places where
children and pets can't reach.
Choking from swallowing small parts and batteries by children or pets is possible, please keep small parts and
batteries at places where children and pets cannot reach.
2. Power on:
Press the "ON/MEM" button (see figure 1).
3. Measuring body temperature on the forehead:
Press the "ON/MEM" button to power on the device. Forehead mode is the default mode. You can see the
the screen and you will hear two beep sounds (see figure 1). In this mode, you can hold the thermometer within 1.5"
(4 cm) from the central forehead and press the "START" button to get the forehead measurement. The time lapse for
measurement might be 1 second. After each forehead measurement, wait for the
for next measurement.
NOTE: icon on the screen
• Forehead temperature is displayed in oral mode. This mode converts the forehead temperature to display its "oral-
equivalent" value.
• Before the measurement, the subject should stay in a stable environment for 5 minutes and avoid exercise/bath for 30
minutes.
• Remember to keep the forehead area clean and away from sweat, cosmetics and scars while taking temperature.
• The "Clinical Bias" is -2.5 ~ -3.1°F (-1.4 ~ -1.7°C).
• The "Limits of Agreement" is 0.98.
• The "Repeatability" is 0.36°F (0.20°C)

MEASURING SURFACE TEMPERATURE

1. After power is on, press and hold the "ON/MEM" button, and press the "START" button one time for "infrared
thermometer" mode you will see the
temperature.
2. When you press the "START" button, you will get the real time temperature immediately. If you press and hold the
"START" button, the measurement reading will be continuously updated.
NOTE: This mode shows the actual and unadjusted surface temperature which is different from the body temperature.

POWER OFF

1. The device will automatically shut-off if left idle for more than 1 minute to extend battery life.
2. Manually power off the device by pressing the "ON/MEM" button.
temperature.
or patient, for example the baby's milk.
or patient, for example the baby's milk.
There are total 25 sets of measurement condition for body temperature.
If the thermometer detects a temperature ≧99.5°F (or 37.5°C) under forehead mode, three à Please see the "Use of the thermometer" section to learn how to measure the object
Memory locations à Please see the "Use of the thermometer" section to learn how to measure the object
à When power on, press the "ON/MEM" button to see the temperature records with
temperature.
temperature.
short beep sound will follow one long beep sound to warn the user for the temperature is above
In "Power Off" mode, press and hold the "START" button, then press the "ON/MEM" button for
99.5°F (37.5°C).
If the thermometer detects a temperature ≧99.5°F (or 37.5°C) under forehead mode, three
If the thermometer detects a temperature ≧99.5°F (or 37.5°C) under forehead mode, three
3 seconds, icon "°F" will be switched to icon "°C". You can also use the same process to
indicator
short beep sound will follow one long beep sound to warn the user for the temperature is above
short beep sound will follow one long beep sound to warn the user for the temperature is above
There are total 25 sets of measurement condition for body temperature.
°F / °C switch
change the LCD display from °C to °F.
99.5°F (37.5°C).
99.5°F (37.5°C).
à When power on, press the "ON/MEM" button to see the temperature records with
NOTE: Memory clear and Celsius/Fahrenheit switch are together. When you switch Celsius and
There are total 25 sets of measurement condition for body temperature.
There are total 25 sets of measurement condition for body temperature.
Fahrenheit, the Memory will be cleared.
In "Power Off" mode, press and hold the "START" button, then press the "ON/MEM" button for
à When power on, press the "ON/MEM" button to see the temperature records with
3 seconds, icon "°F" will be switched to icon "°C". You can also use the same process to
à When power on, press the "ON/MEM" button to see the temperature records with The device setting with buzzer is on, you can set buzzer on/off under Mute mode.
change the LCD display from °C to °F.
In "Power Off" mode, press and hold the "START" button, then press the "ON/MEM" button for
When power on, press and hold the "ON/MEM" button for 3 seconds. The icon
In "Power Off" mode, press and hold the "START" button, then press the "ON/MEM" button for
NOTE: Memory clear and Celsius/Fahrenheit switch are together. When you switch Celsius and
3 seconds, icon "°F" will be switched to icon "°C". You can also use the same process to the LCD screen and then release the "ON/MEM" button to set MUTE. Thus you will not hear
3 seconds, icon "°F" will be switched to icon "°C". You can also use the same process to
Mute mode
Fahrenheit, the Memory will be cleared.
change the LCD display from °C to °F. beep sounds. You can also use the same process to turn off the Mute function.
change the LCD display from °C to °F.
The device setting with buzzer is on, you can set buzzer on/off under Mute mode.
NOTE: Memory clear and Celsius/Fahrenheit switch are together. When you switch Celsius and
NOTE: Memory clear and Celsius/Fahrenheit switch are together. When you switch Celsius and
NOTE: If keep pressing "ON/MEN" button for 2 seconds after
When power on, press and hold the "ON/MEM" button for 3 seconds. The icon Fahrenheit, the Memory will be cleared.
Fahrenheit, the Memory will be cleared. be power off WITHOUT setting Mute.
the LCD screen and then release the "ON/MEM" button to set MUTE. Thus you will not hear The device setting with buzzer is on, you can set buzzer on/off under Mute mode.
The device setting with buzzer is on, you can set buzzer on/off under Mute mode.
Use of the thermometer
beep sounds. You can also use the same process to turn off the Mute function.
When power on, press and hold the "ON/MEM" button for 3 seconds. The icon
When power on, press and hold the "ON/MEM" button for 3 seconds. The icon
Note: If there is any temperature difference between the places where the device is stored and where you are going to measure, subject and the d
NOTE: If keep pressing "ON/MEN" button for 2 seconds after the LCD screen and then release the "ON/MEM" button to set MUTE. Thus you will not hear
the LCD screen and then release the "ON/MEM" button to set MUTE. Thus you will not hear
stay in the same room for at least 15 minutes before measurement.
be power off WITHOUT setting Mute. beep sounds. You can also use the same process to turn off the Mute function.
beep sounds. You can also use the same process to turn off the Mute function.
1. Always make sure the probe lens is clean without any damage and the forehead is clean.
NOTE: If keep pressing "ON/MEN" button for 2 seconds after
NOTE: If keep pressing "ON/MEN" button for 2 seconds after
Warning: Choking from swallowing small parts and batteries by children or pets is possible, please keep small parts and batteries at places
be power off WITHOUT setting Mute.
be power off WITHOUT setting Mute.
children and pets can't reach.
2. Power on:
Press the "ON/MEM" button (see figure 1).
ó
3. Measuring body temperature on the forehead:
children and pets can't reach.
Figure 1
icon on your LCD display. In this mode, you can get the target surface
icon flashing, the device will
icon flashing, the device will
icon flashing, the device will
Figure 2
icon on your LCD
www.mastercool.com
icon.
icon.
icon.
icon flashing, the device will
icon.
will flash on
will flash on
will flash on
icon will flash on
icon flashing, the device will
icon flashing, the device will be will flash on
Press the "ON/MEM" button to power on the device. Forehead mode is the defaul
and hear two beep sounds (see figure 1). In this mode, you can hold the thermomet
the "START" button to get the forehead measurement. The time consuming for meas
icon to stop flashing to be ready
measurement, wait icon stop flashing to be ready for next measurement.
Points for attention:
a. Forehead temperature is displayed in oral mode. This mode converts the forehead t
b. Before the measurement, the subject should stay in a stable environment for 5 minu
c. Remember to keep the forehead area clean and away from sweat, cosmetics and sc
-2.5 ~ -3.1°F
d. The "Clinical Bias" is
e. The "Limits of Agreement" is 0.98.
f. The "Repeatability" is 0.36°F
4. Measuring surface temperature:
4.1 After power on, press and hold the "ON/MEM" button, and press the "START" bu
display. In this mode, you can get the target surface temperature.
4.2 When you press the "START" button, you will get the real time temperature imm
be continuously updated.
4.3 Applications include temperature measurements for water, milk, cloth, skin or ot
* Note: This mode shows the actual and unadjusted surface temperature wh
5. Power off:
5.1 Device will automatically shut off if left idle for more than 1 minute to extend batt
5.2 Manually power off the device by pressing the "ON/MEM" button.
Important Notes
Please make sure the probe is clean to ensure an acc
The probe lens is the most delicate part of the thermo
a. Use alcohol swabs or cotton swabs moistened wit
b. Allow the probe to fully dry for at least 1 minute.
Cleaning
c. Keep the unit dry and away from any liquids and d
And Storage
d. Storage temperature range: It should be stored at
e. The Probe should not be submerged into liquids.
Holding the thermometer too long may cause a highe
This could make the body temperature measurement
When the "Low Battery" icon indicates the battery is low, the
1. Open the battery cover: Use the thumbs to push battery
2. Insert the new AAA *2 pcs batteries. (See Figure 2)
Battery replacement
3. Replace the battery cover. (See Figure 3)
Figure 1
Trouble shooting:
Error Message
Error 5~9, the system is not functioning properly.
Measurement before device stabilization.
The ambient temperature is not within the range between 50
icon.
will flash on
ó
ó
ó
ó
Figure 1
Figure 1
Figure 1
Figure 1
Press the "ON/MEM" button to power on the
and hear two beep sounds (see figure 1). In
the "START" button to get the forehead meas
icon on
measurement, wait icon stop flashing to
Points for attention:
a. Forehead temperature is displayed in or
b. Before the measurement, the subject sh
c. Remember to keep the forehead area cle
d. The "Clinical Bias" is
e. The "Limits of Agreement" is 0.98.
0.36°F
f. The "Repeatability" is
4. Measuring surface temperature:
4.1 After power on, press and hold the "ON/M
(-1.4 ~ -1.7 ° C).
display. In this mode, you can get the tar
4.2 When you press the "START" button, you
(0.20 ° C)
be continuously updated.
4.3 Applications include temperature measur
* Note: This mode shows the actual and
5. Power off:
5.1 Device will automatically shut off if left idl
5.2 Manually power off the device by pressin
Important Notes
Please make sur
The probe lens is
a. Use alcohol s
b. Allow the prob
Cleaning
c. Keep the unit
And Storage
d. Storage tempe
e. The Probe sho
Holding the therm
This could make
When the "Low Batte
1. Open the battery c
2. Insert the new AA
Battery replacement
3. Replace the batte
Trouble shooting:
Error Message
Figure 2 Error 5~9, the system is
Measurement before de
Problem
The ambient temperatu
(1)
(2)
(1)
(2)
ó
Figure
-2.5 ~ -3.1°F
(-1.4
(0.20 ° C)
Figure 1
In forehead mode
In surface mode:
3
In forehead mode
In surface mode:
o F~104