Specifications - MasterCool 52225-MED Operating Instructions Manual

MULTI-FUNCTION MEDICAL/SURFACE INFRARED THERMOMETER

SPECIFICATIONS:

• Temperature measurement range:
Forehead mode: 93.2 to 108˚F (34 to 42.2°C)
Surface mode: -7.6 to 176˚F (-22 to 80˚C)
• Operating temperature range:
50 to 104˚F (10 to 40˚C), 15% to 85% RH
• Storage temperature range:
THD2FE Non-contact Forehead Thermometer
stored at room temperature between -4 to 122 (-20 to 50˚C), RH≤85%
Indications for use:
Transportation temperature shall be less than 158˚F (70˚C), RH≤95%
• Atmospheric pressure: 800 to 1013 hPa
THD2FE Non-contact Forehead Thermometer Intended operator:
• Accuracy: Specifications
Indications for use:
Forehead mode: ±0.4˚F (0.2˚C) within 95 to 107.6˚F (35 to 42˚C)
THD2FE Non-contact Forehead Thermometer
Intended operator:
(Ambient Temp: 59 to 95˚F (15 to 35˚C), ±0.5˚F (0.3˚C) for other range
Specifications
Indications for use:
Surface mode: ±0.5˚F (0.3˚C) within 71.6 to 108˚F (22 to 42.2˚C), others
THD2FE Non-contact Forehead Thermometer
±4% or ±4˚F (2˚C) whichever is greater Intended operator:
THD2FE Non-contact Forehead Thermometer
Indications for use:
Specifications
• Battery: AAA x 2 pcs
Indications for use:
• Battery life: around 3,000 continuous readings Intended operator:
Intended operator:
Specifications
• Expected Service Life: 4 years
Specifications
• Blue LED Backlight: automatically turned on after measurement, and automatically turned off after 5 seconds
• Enclosure Rating: IP22
NOTE: The thermometer is calibrated at the time of manufacturing. If you question calibration mode, the accuracy of
temperature measurements or unexpected events at any time, please contact the service department.
Warning: No modification of this equipment is allowed.
Warning: Do not submerge device into any liquids or expose to direct moisture.
FUNCTIONS
FOREHEAD TEMPERATURE:
Functions
This thermometer is not meant to replace a visit to the doctor. Please also remember to compare the
measurement result to your regular body temperature. Please consult with a doctor if you have health
Forehead temperature
Functions
concerns.
• Please see the "USING THE THERMOMETER" section to learn how to measure the body
temperature.
Functions Forehead temperature
Surface temperature
SURFACE TEMPERATURE:
Functions
Forehead temperature
The surface mode shows the actual and unadjusted surface temperature which is different from the
Functions
Surface temperature
body temperature.
Temperature indicator
Forehead temperature
• Please see the "USING THE THERMOMETER" section to learn how to measure the object
Forehead temperature
temperature.
Surface temperature
Memory locations
Temperature indicator
TEMPERATURE INDICATOR:
Surface temperature
If the thermometer detects a temperature ≥99.5°F (or 37.5°C) under forehead mode, three short
Surface temperature
Memory locations
Temperature °F / °C switch indicator
beeps will sound followed by one long beep to warn the user that the temperature is above 99.5°F
(37.5°C).
Temperature indicator
Memory locations
Temperature °F / °C switch indicator
MEMORY LOCATIONS:
Mute mode
There are 25 sets of measurement conditions for body temperature. Memory locations
Memory locations
°F / °C switch
• When power is on, press the "ON/MEM" button to see the temperature records with
Mute mode
Use of the thermometer
°F / °C switch
°F / °C switch
Note: If there is any temperature difference between the places where the device is stored and where you are going to measure, subject and the device shou
stay in the same room for at least 15 minutes before measurement.
Mute mode
1. Always make sure the probe lens is clean without any damage and the forehead is clean.
Use of the thermometer
Warning: Choking from swallowing small parts and batteries by children or pets is possible, please keep small parts and batteries at places where
Note: If there is any temperature difference between the places where the device is stored and where you are going to measure, subject and the device shoul
2
Mute mode
stay in the same room for at least 15 minutes before measurement.
2. Power on:
Mute mode
1. Always make sure the probe lens is clean without any damage and the forehead is clean.
Use of the thermometer
Press the "ON/MEM" button (see figure 1).
The Non-contact Clinical Thermometer, Model THD2FE is an infrared thermometer intended
for the intermittent measurement of human body temperature in people of all ages.
At least 11 years old (5 years intensive reading experience), no maximum.
þ Temperature measurement range:
The Non-contact Clinical Thermometer, Model THD2FE is an infrared thermometer intended
Forehead mode: 93.2~108°F (34~42.2°C)
for the intermittent measurement of human body temperature in people of all ages.
Surface mode: -7.6~176°F (-22~80°C)
At least 11 years old (5 years intensive reading experience), no maximum.
þ Operating temperature range: 50~104°F (10~40°C), 15%~85% RH
þ Temperature measurement range:
The Non-contact Clinical Thermometer, Model THD2FE is an infrared thermometer intended
þ Storage temperature range: It should be stored at room temperature between -4~122°F
Forehead mode: 93.2~108°F (34~42.2°C)
for the intermittent measurement of human body temperature in people of all ages.
(-20~+50°C), RH≦85%
Surface mode: -7.6~176°F (-22~80°C)
At least 11 years old (5 years intensive reading experience), no maximum.
Transportation temperature shall be less than 158°F (70°C), RH≦95%
þ Operating temperature range: 50~104°F (10~40°C), 15%~85% RH
The Non-contact Clinical Thermometer, Model THD2FE is an infrared thermometer intended
þ Temperature measurement range:
þ Atmospheric pressure: 800~1013 hPa
The Non-contact Clinical Thermometer, Model THD2FE is an infrared thermometer intended
þ Storage temperature range: It should be stored at room temperature between -4~122°F
for the intermittent measurement of human body temperature in people of all ages.
Forehead mode: 93.2~108°F (34~42.2°C)
þ Comply with ASTM E1965-98, EN ISO 80601-2-56, IEC/EN60601-1-2(EMC),
for the intermittent measurement of human body temperature in people of all ages.
(-20~+50°C), RH≦85%
At least 11 years old (5 years intensive reading experience), no maximum.
Surface mode: -7.6~176°F (-22~80°C)
IEC/EN60601-1(Safety) standards, ISO10993, RoHS.
At least 11 years old (5 years intensive reading experience), no maximum.
þ Temperature measurement range: Transportation temperature shall be less than 158°F (70°C), RH≦95%
þ Operating temperature range: 50~104°F (10~40°C), 15%~85% RH
þ Accuracy:
þ Temperature measurement range:
þ Storage temperature range: It should be stored at room temperature between -4~122°F Forehead mode: 93.2~108°F (34~42.2°C)
þ Atmospheric pressure: 800~1013 hPa
Forehead mode: ±0.4 o F (0.2 °C ) within 95~107.6°F (35~42°C),
Forehead mode: 93.2~108°F (34~42.2°C)
Surface mode: -7.6~176°F (-22~80°C)
(-20~+50°C), RH≦85%
þ Comply with ASTM E1965-98, EN ISO 80601-2-56, IEC/EN60601-1-2(EMC),
o F (0.3 °C ) for other range.
Surface mode: -7.6~176°F (-22~80°C) ±0.5
þ Operating temperature range: 50~104°F (10~40°C), 15%~85% RH
IEC/EN60601-1(Safety) standards, ISO10993, RoHS.
Transportation temperature shall be less than 158°F (70°C), RH≦95%
Surface mode: ±0.5°F (0.3°C) within 71.6~108°F (22~42.2°C),
þ Operating temperature range: 50~104°F (10~40°C), 15%~85% RH
þ Storage temperature range: It should be stored at room temperature between -4~122°F
þ Accuracy:
þ Atmospheric pressure: 800~1013 hPa
þ Storage temperature range: It should be stored at room temperature between -4~122°F others ±4% or ±4°F (2°C) whichever is greater.
(-20~+50°C), RH≦85%
Forehead mode: ±0.4 o F (0.2 °C ) within 95~107.6°F (35~42°C),
þ Comply with ASTM E1965-98, EN ISO 80601-2-56, IEC/EN60601-1-2(EMC),
(-20~+50°C), RH≦85%
þ Temperature indicator, memory and °F / °C switch function
Transportation temperature shall be less than 158°F (70°C), RH≦95%
IEC/EN60601-1(Safety) standards, ISO10993, RoHS.
o F (0.3 °C ) for other range.
±0.5
þ Battery: AAA x 2 pcs
Transportation temperature shall be less than 158°F (70°C), RH≦95%
þ Atmospheric pressure: 800~1013 hPa
þ Accuracy:
Surface mode: ±0.5°F (0.3°C) within 71.6~108°F (22~42.2°C),
þ Battery life: around 3,000 continuous readings.
þ Atmospheric pressure: 800~1013 hPa
þ Comply with ASTM E1965-98, EN ISO 80601-2-56, IEC/EN60601-1-2(EMC),
o
Forehead mode: ±0.4 F (0.2 °C ) within 95~107.6°F (35~42°C),
others ±4% or ±4°F (2°C) whichever is greater.
þ Expected Service Life: 4 years
þ Comply with ASTM E1965-98, EN ISO 80601-2-56, IEC/EN60601-1-2(EMC),
IEC/EN60601-1(Safety) standards, ISO10993, RoHS.
o
F (0.3 °C ) for other range.
þ Temperature indicator, memory and °F / °C switch function
±0.5
þ This thermometer converts the forehead temperature to display its "oral equivalent."
IEC/EN60601-1(Safety) standards, ISO10993, RoHS.
þ Accuracy:
Surface mode: ±0.5°F (0.3°C) within 71.6~108°F (22~42.2°C),
þ Battery: AAA x 2 pcs
(according to the result of the clinical evaluation to get the offset value)
þ Accuracy:
o
Forehead mode: ±0.4 F (0.2 °C ) within 95~107.6°F (35~42°C),
þ Battery life: around 3,000 continuous readings.
others ±4% or ±4°F (2°C) whichever is greater.
þ Blue LED Backlight
o
Forehead mode: ±0.4 F (0.2 °C ) within 95~107.6°F (35~42°C),
o F (0.3 °C ) for other range.
þ Expected Service Life: 4 years
±0.5
þ Temperature indicator, memory and °F / °C switch function Blue LED backlight will be automatically turned on after measurement, and automatically
o
F (0.3 °C ) for other range.
Surface mode: ±0.5°F (0.3°C) within 71.6~108°F (22~42.2°C), ±0.5
þ This thermometer converts the forehead temperature to display its "oral equivalent."
þ Battery: AAA x 2 pcs turned off after 2 seconds.
Surface mode: ±0.5°F (0.3°C) within 71.6~108°F (22~42.2°C),
(according to the result of the clinical evaluation to get the offset value)
others ±4% or ±4°F (2°C) whichever is greater.
þ Battery life: around 3,000 continuous readings. þ Enclosure Rating: IP22
others ±4% or ±4°F (2°C) whichever is greater.
þ Blue LED Backlight
þ Temperature indicator, memory and °F / °C switch function
þ Dimensions: 158.0 x 48.0 x 40.2 mm þ Expected Service Life: 4 years
þ Temperature indicator, memory and °F / °C switch function Blue LED backlight will be automatically turned on after measurement, and automatically
þ This thermometer converts the forehead temperature to display its "oral equivalent." þ Battery: AAA x 2 pcs þ Weight: 100 grams including battery
þ Battery: AAA x 2 pcs turned off after 2 seconds.
þ Battery life: around 3,000 continuous readings.
(according to the result of the clinical evaluation to get the offset value)
The device should not submerge into any liquids and expose it to direct moisture.
þ Battery life: around 3,000 continuous readings. þ Enclosure Rating: IP22
þ Blue LED Backlight þ Expected Service Life: 4 years
There is no gender and age limitation for using the infrared thermometer.
þ Expected Service Life: 4 years þ Dimensions: 158.0 x 48.0 x 40.2 mm
þ This thermometer converts the forehead temperature to display its "oral equivalent."
Blue LED backlight will be automatically turned on after measurement, and automatically
This is not an AP or APG product.
þ This thermometer converts the forehead temperature to display its "oral equivalent." þ Weight: 100 grams including battery
(according to the result of the clinical evaluation to get the offset value) turned off after 2 seconds.
(according to the result of the clinical evaluation to get the offset value)
The device should not submerge into any liquids and expose it to direct moisture.
þ Blue LED Backlight
þ Enclosure Rating: IP22
þ Blue LED Backlight The thermometer has been designed for home use. It's not meant to replace a visit to the
þ Dimensions: 158.0 x 48.0 x 40.2 mm Blue LED backlight will be automatically turned on after measurement, and automatically There is no gender and age limitation for using the infrared thermometer.
doctor. Please also remember to compare the measurement result to your regular body
Blue LED backlight will be automatically turned on after measurement, and automatically
turned off after 2 seconds.
þ Weight: 100 grams including battery This is not an AP or APG product.
turned off after 2 seconds. temperature. Please consult with doctor if you have health concerns.
þ Enclosure Rating: IP22
The device should not submerge into any liquids and expose it to direct moisture.
à Please see the "Use of the thermometer" section to learn how to measure the body
þ Enclosure Rating: IP22
þ Dimensions: 158.0 x 48.0 x 40.2 mm
There is no gender and age limitation for using the infrared thermometer.
The thermometer has been designed for home use. It's not meant to replace a visit to the
þ Dimensions: 158.0 x 48.0 x 40.2 mm temperature.
þ Weight: 100 grams including battery
This is not an AP or APG product.
doctor. Please also remember to compare the measurement result to your regular body
þ Weight: 100 grams including battery The surface mode shows the actual and unadjusted surface temperature which is different from
The device should not submerge into any liquids and expose it to direct moisture.
temperature. Please consult with doctor if you have health concerns.
the body temperature. It can help you monitor if the object temperature is suitable for the baby
The device should not submerge into any liquids and expose it to direct moisture.
There is no gender and age limitation for using the infrared thermometer.
à Please see the "Use of the thermometer" section to learn how to measure the body
The thermometer has been designed for home use. It's not meant to replace a visit to the or patient, for example the baby's milk.
There is no gender and age limitation for using the infrared thermometer.
This is not an AP or APG product.
temperature.
doctor. Please also remember to compare the measurement result to your regular body à Please see the "Use of the thermometer" section to learn how to measure the object
This is not an AP or APG product.
The surface mode shows the actual and unadjusted surface temperature which is different from
temperature. Please consult with doctor if you have health concerns. temperature.
the body temperature. It can help you monitor if the object temperature is suitable for the baby
à Please see the "Use of the thermometer" section to learn how to measure the body The thermometer has been designed for home use. It's not meant to replace a visit to the
If the thermometer detects a temperature ≧99.5°F (or 37.5°C) under forehead mode, three
The thermometer has been designed for home use. It's not meant to replace a visit to the or patient, for example the baby's milk.
temperature. doctor. Please also remember to compare the measurement result to your regular body
short beep sound will follow one long beep sound to warn the user for the temperature is above
doctor. Please also remember to compare the measurement result to your regular body
à Please see the "Use of the thermometer" section to learn how to measure the object
temperature. Please consult with doctor if you have health concerns.
The surface mode shows the actual and unadjusted surface temperature which is different from
99.5°F (37.5°C).
temperature. Please consult with doctor if you have health concerns.
temperature.
à Please see the "Use of the thermometer" section to learn how to measure the body
the body temperature. It can help you monitor if the object temperature is suitable for the baby
There are total 25 sets of measurement condition for body temperature.
à Please see the "Use of the thermometer" section to learn how to measure the body
temperature.
If the thermometer detects a temperature ≧99.5°F (or 37.5°C) under forehead mode, three or patient, for example the baby's milk.
temperature.
à When power on, press the "ON/MEM" button to see the temperature records with
The surface mode shows the actual and unadjusted surface temperature which is different from à Please see the "Use of the thermometer" section to learn how to measure the object
short beep sound will follow one long beep sound to warn the user for the temperature is above
The surface mode shows the actual and unadjusted surface temperature which is different from
the body temperature. It can help you monitor if the object temperature is suitable for the baby
temperature.
99.5°F (37.5°C).
In "Power Off" mode, press and hold the "START" button, then press the "ON/MEM" button for
the body temperature. It can help you monitor if the object temperature is suitable for the baby
or patient, for example the baby's milk.
If the thermometer detects a temperature ≧99.5°F (or 37.5°C) under forehead mode, three
3 seconds, icon "°F" will be switched to icon "°C". You can also use the same process to
There are total 25 sets of measurement condition for body temperature.
or patient, for example the baby's milk.
à Please see the "Use of the thermometer" section to learn how to measure the object
change the LCD display from °C to °F.
short beep sound will follow one long beep sound to warn the user for the temperature is above
à When power on, press the "ON/MEM" button to see the temperature records with
à Please see the "Use of the thermometer" section to learn how to measure the object
temperature.
NOTE: Memory clear and Celsius/Fahrenheit switch are together. When you switch Celsius and
99.5°F (37.5°C).
temperature.
In "Power Off" mode, press and hold the "START" button, then press the "ON/MEM" button for
If the thermometer detects a temperature ≧99.5°F (or 37.5°C) under forehead mode, three
Fahrenheit, the Memory will be cleared.
There are total 25 sets of measurement condition for body temperature.
If the thermometer detects a temperature ≧99.5°F (or 37.5°C) under forehead mode, three
3 seconds, icon "°F" will be switched to icon "°C". You can also use the same process to
The device setting with buzzer is on, you can set buzzer on/off under Mute mode.
short beep sound will follow one long beep sound to warn the user for the temperature is above
à When power on, press the "ON/MEM" button to see the temperature records with
change the LCD display from °C to °F.
short beep sound will follow one long beep sound to warn the user for the temperature is above
99.5°F (37.5°C).
When power on, press and hold the "ON/MEM" button for 3 seconds. The icon
NOTE: Memory clear and Celsius/Fahrenheit switch are together. When you switch Celsius and
99.5°F (37.5°C).
In "Power Off" mode, press and hold the "START" button, then press the "ON/MEM" button for
the LCD screen and then release the "ON/MEM" button to set MUTE. Thus you will not hear
There are total 25 sets of measurement condition for body temperature.
Fahrenheit, the Memory will be cleared.
3 seconds, icon "°F" will be switched to icon "°C". You can also use the same process to
beep sounds. You can also use the same process to turn off the Mute function.
There are total 25 sets of measurement condition for body temperature.
à When power on, press the "ON/MEM" button to see the temperature records with
The device setting with buzzer is on, you can set buzzer on/off under Mute mode.
change the LCD display from °C to °F.
NOTE: If keep pressing "ON/MEN" button for 2 seconds after
à When power on, press the "ON/MEM" button to see the temperature records with
In "Power Off" mode, press and hold the "START" button, then press the "ON/MEM" button for NOTE: Memory clear and Celsius/Fahrenheit switch are together. When you switch Celsius and
When power on, press and hold the "ON/MEM" button for 3 seconds. The icon
be power off WITHOUT setting Mute.
In "Power Off" mode, press and hold the "START" button, then press the "ON/MEM" button for
3 seconds, icon "°F" will be switched to icon "°C". You can also use the same process to
the LCD screen and then release the "ON/MEM" button to set MUTE. Thus you will not hear Fahrenheit, the Memory will be cleared.
3 seconds, icon "°F" will be switched to icon "°C". You can also use the same process to
change the LCD display from °C to °F.
beep sounds. You can also use the same process to turn off the Mute function. The device setting with buzzer is on, you can set buzzer on/off under Mute mode.
change the LCD display from °C to °F.
NOTE: Memory clear and Celsius/Fahrenheit switch are together. When you switch Celsius and
NOTE: If keep pressing "ON/MEN" button for 2 seconds after
When power on, press and hold the "ON/MEM" button for 3 seconds. The icon
NOTE: Memory clear and Celsius/Fahrenheit switch are together. When you switch Celsius and
Fahrenheit, the Memory will be cleared.
be power off WITHOUT setting Mute.
the LCD screen and then release the "ON/MEM" button to set MUTE. Thus you will not hear
Fahrenheit, the Memory will be cleared.
The device setting with buzzer is on, you can set buzzer on/off under Mute mode.
beep sounds. You can also use the same process to turn off the Mute function.
The device setting with buzzer is on, you can set buzzer on/off under Mute mode.
When power on, press and hold the "ON/MEM" button for 3 seconds. The icon
NOTE: If keep pressing "ON/MEN" button for 2 seconds after
When power on, press and hold the "ON/MEM" button for 3 seconds. The icon
children and pets can't reach.
the LCD screen and then release the "ON/MEM" button to set MUTE. Thus you will not hear
www.mastercool.com
be power off WITHOUT setting Mute.
the LCD screen and then release the "ON/MEM" button to set MUTE. Thus you will not hear
beep sounds. You can also use the same process to turn off the Mute function.
beep sounds. You can also use the same process to turn off the Mute function.
START
START
STAND-BY
(ON-MEM)
LCD
icon.
icon.
icon.
will flash on
icon.
icon flashing, the device will
icon.
icon.
will flash on
icon flashing, the device will will flash on
will flash on
icon flashing, the device will
will flash on
English
PROBE
LENS
BATTERY
COVER
ó
ó
ó
ó
ó