Removing The Power Supply Backplane - IBM TotalStorage 200 Service Manual

Removing the power supply backplane

To remove the power supply backplane:
1. Power OFF the appliance.
2. Disconnect all external cables from the appliance.
3. Pull the power supplies out far enough to remove the power supply backplane.
4. Remove the cover. See "Removing the cover (Model 200)" on page 51.
5. Disconnect cables from the backplane.
6. Press the arrow on the tab 1 to release the backplane.
7. Slide out the power supply backplane 2 to remove it.
90
Models 200 and 225 Service Guide
1
Tab
2
Power supply backplane