Replacing The Model 225 Cover - IBM TotalStorage 200 Service Manual

Model 225:
Flange
Figure 37. Replacing the Model 225 cover
To replace the appliance top cover:
1. Align the top cover with the top of the appliance, about 25 mm (1 in.) from the
front of the appliance; the flanges on the left and right sides of the cover should
be on the outside of the appliance chassis.
2. Hold the cover against the appliance and slide the cover toward the front of the
appliance until the cover clicks into place.
Flange
Top cover
Side latches
Chapter 4. Adding and replacing components
81