Removing The Rear Cable Bracket - IBM TotalStorage 200 Service Manual

Removing the rear cable bracket

To remove the on/off reset board:
1. Power OFF the appliance
2. Disconnect cables.
3. Press the arrow on the tab of the rear cable bracket 1 to release the bracket
4. Carefully peel away the adhesive strip 2 .
5. Remove the screws 3 .
6. Gently pull the rear cable bracket 1 to remove it.
88
Models 200 and 225 Service Guide
1
Rear cable bracket
2
Adhesive strip
3
Screws (2)
arm.