Removing The Door And Bezel (Model 200); Removing The Appliance Door Of The Model - IBM TotalStorage 200 Service Manual

Removing the door and bezel (Model 200)

Figure 15. Removing the appliance door of the Model 200
To remove the appliance door:
1. Unlock and open the appliance door.
2. Locate the flange on the top edge of the door.
3. Press down on the flange while pressing out on the door; then, lift the appliance
To remove the bezel:
1. Move the blue bezel-release lever, following the curve of the lever opening.
2. Lift the bezel tabs out of the slots and pull the bezel away from the appliance
54
Models 200 and 225 Service Guide
Bezel-release lever
door up and off the hinge. Set the door aside in a safe place.
front. Store the bezel in a safe place.
Door
Flange