Unlocking The Cable Retention Bracket - IBM Storwize V7000 Quick Installation Manual

Figure 15. Unlocking the cable retention bracket
3. Slide the cable retention bracket away from the power supply unit until there is enough room to
attach the cable retention bracket to the cable. When sliding the bracket away from the cable plugin,
pull the lever on the bracket that controls the cable tie towards you. You do not need to pull the lever
to slide the bracket towards the cable plugin.
4. Attach a power cord to each of the two power supply units in each enclosure.
Ensure that cables are installed in a tidy manner to reduce the risk of cable damage when Storwize
V7000 replaceable units are removed or inserted.
5. Place the cable retention bracket around the end of the cable that plugs into the power supply unit.
6. Slide the cable retention bracket along the cord until it fits snugly against the plug end of the cable.
20
Storwize V7000 Version 6.1.0: Quick Installation Guide