Precautions When Moving The Machine - Sega Transformers Human Alliance Owner's Manual

8. PRECAUTIONS WHEN MOVING THE MACHINE

CASE 1: the operator should follow
side billboard plate.
and the two-
ow elevator (not smaller than 1630*1370*2600mm), and passing rough road.
1 Disassemble the right side billboard plate
2 Unplug the right lamp
3 Disassemble the left side billboard plate
Unscrew 3pcs of M4*25 cross
flat head screws with 3mm
hexagonal key
Steady the side plate to
prevent falling down, and
handle gently
scratch on the organic plate.
14
the below method to
moving over a long distance, or entering a narr
When
wire connector
to avoid any
http://op.sega.jp/op_e/
take apart the billboard
Unscrew 3pcs of M4*25 cross flat
head screws with 3mm
key,
Steady the side plate to prevent falling
down, and handle gently
scratch on the organic plate.
lamp
hexagonal
to avoid any