Precautions When Moving The Machine - Sega SHOOT THIS WIN THIS Service Manual

7 PRECAUTIONS WHEN MOVING THE MACHINE
● Always dsconnect the power cable before movng the product. If t s moved wth
the power cable connected, the cable could be damaged, causng fre or electrc
shock.
● To move the unt over the floor, pull n the adjustors and have the casters contact
the floor. Whle movng the unt, be careful that the casters do not roll over the
power cord or the ground wre. If cord or wre s damaged, there could be electrcal
shocks and/or short crcuts.
● When crossng a sloped or stepped area, remove all przes from the prze area to
mnmze on weght and to prevent heavy przes swngng n to the glass. Falure
to remove przes from the prze area may cause njury to personnel and damage to
machne.
● When lftng the cabnet up steps, you must hold t by the desgnated handles or by
the bottom surface. Lftng t by any other area may lead to damage or dsfiguraton
to that part or surroundng parts due to the weght of the cabnet and could also
lead to njury of personnel.
● When tltng the cabnet to move t across a sloped or stepped area, always use at
least two people. Attemptng such an operaton alone can lead to accdent or njury.
● When movng the cabnet, do not hold, push or pull the Control Unts. Ths may
dsfigure or damage them.
● When movng the cabnet through a doorway, push the cabnet ether front or rear
first. Do not push the cabnet sdeways through a door as damage to the controller or
controller holder or both may occur.
● Do not use the Controller Holders to move the cabnet, n dong so may damage or
dsfigure them.
7
19