Precautions To Be Heeded When Moving The Machine - Sega Olle King Owner's Manual

Table of Contents

Advertisement

7. PRECAUTIONS WHEN MOVING THE MACHINE
● When moving the machine, be sure to unplug the power plug. Moving the machine
with the plug as is inserted can damage the power cord and cause fire and electric
WARNING!
shock hazards.
● When moving the machine on the floor, retract the Adjusters and ensure that Casters
make contact with the floor. During transportation, pay careful attention so that
Casters do not tread power cords and earth wires. Damaging the power cords can
cause electric shock or short circuit.
● Always detach the assembly tube when transporting this product. If any unnecessary
load is applied, it may cause damage to the tube and wiring, which can result in
electric shock, electric shorting accidents, etc.
● There is a danger of the front cabinet toppling over if it is left unsupported. If the
cabinet is accidentally pushed or left leaning it may topple over, which may result in
serious accidental injury.
● Do not push on any parts made of glass (e.g. CRT screen) or plastic, as these parts
may break and result in bodily injury.
CAUTION!
● When lifting the cabinet, be sure to hold the grip portions or bottom part. Failure to
observe this may damage parts and cause injury.
● Do not push the Billboard. Failure to observe this may damage the installation
portions and cause unexpected accidents.
STOP
Remove the GD-ROM disc before moving. Moving the machine with the disc inserted
could damage the disc and/or the GD-ROM drive.
IMPORTANT!
www.seuservice.com
36

Advertisement

Table of Contents
loading

Table of Contents