Precautions To Be Heeded When Moving The Machine - Sega SOUL SURFER Owner's Manual

7. PRECAUTIONS TO BE HEEDED WHEN MOVING THE MACHINE

● When moving the machine, be sure to unplug the power plug. Moving the
machine with the plug as is inserted can damage the power cord and cause fire
WARNING!
and electric shock hazards.
● When moving the machine on the floor, retract the Adjusters and ensure
that Casters make contact with the floor. During transportation, pay careful
attention so that Casters do not tread power cords and earth wires. Damaging
the power cords can cause electric shock and short circuit hazards.
● When lifting the cabinet, be sure to hold the grip portions or bottom part.
Lifting the cabinet by holding other portions can damage parts and installation
portions due to the empty weight of the cabinet, and cause personal injury.
● When transporting the product in places with step-like differences in grade,
disassemble into each unit before transporting. Lifting up the product in an
attempt to cross the step-like differences in an as is assembled condition may
damage the unit's joining portions and cause a personal injury resulting from
damage.
● When moving the PTV, do not push it from the rear side. Push it from
sideways. Pushing the PTV from the rear side can have the PTV fall down,
causing personal injury etc. In case the floor has slanted surfaces or step-like
differences, be sure to move the machine by 2 or more persons.
● Do not insert the fork to places other than designated when using a Forklift to
transport the machine.
Failure to observe this could cause falling down and injury resulting from
falling down.
● Be careful not to damage the Sensor Mat or the Sensor Mat wires when
moving the machine. The Sensor Mat plays an important role in preventing
accidents. Operating the machine with a damaged Sensor Mat may cause an
accident.
● Be sure to remove the Sensor Mat and the Mat Holder Rear. Moving the
machine with these may result in damage of the parts.
CAUTION!
● Do not push the plastic made parts. Failure to observe this may damage parts
and cause injury due to fragments resulting from damage.
● Be careful to store the shipping beam as it is used when moving the rear
cabinet with a forklift. Failure to assemble the shipping beam when using a
forklift may result in damage or deformation of the parts.
www.seuservice.com
36