WAGO I/O System 750
753-506 2DO 24V DC 0.5A/ diagnostics
3.2.2
Power Jumper Contacts/Field Supply
Risk of injury due to sharp-edged blade contacts!
The blade contacts are sharp-edged. Handle the I/O module carefully to prevent
injury. Do not touch the blade contacts.
The I/O module 753-506 has 3 self-cleaning power jumper contacts that supply
and transmit power for the field side. The contacts on the left side of the I/O
module are designed as male contacts and the contacts on the right side as
spring contacts.
Figure 3: Power Jumper Contacts
Table 4: Legend for Figure "Power Jumper Contacts"
Contact
1
2
3
4
5
6
Type
Spring contact
Spring contact
Spring contact
Blade contact
Blade contact
Blade contact
Public
Device Description
Function
Potential transmission (U
for field supply
Potential transmission (0 V)
for field supply
Potential transmission (ground)
for field supply
Potential feed-in (ground)
for field supply
Potential feed-in (0 V)
for field supply
Potential feed-in (U
for field supply
19
)
v
)
v
Manual
Version 1.3.1