Attaching A Grip Pad - Epson SC-F2200 Series General Information Manual

SC-F2200 Series General Information

Attaching a Grip Pad

A
Only peel off one section on the back of the
grip pad as shown in the illustration.
B
Place the platen on a flat surface, align the
corners of the grip pad so they are slightly
inside the corners of the platen, and then fasten
the adhesive side of the grip pad to the platen.
Do not allow the corners of the grip pad
from which the back has not been removed to
protrude from the edges of the other side of the
platen.
C
Gently press on the section from which the
back has been peeled off the grip pad to stick
the grip pad onto the platen.
Using the Printer
D
Peel off all of the other sections on the back of
the grip pad as shown in the illustration.
E
Stick it from the end that is already stuck, as
shown in the illustration.
7