Printer Parts; Front Section; Rear Section - Epson Stylus Pro 7700 User Manual

Epson Stylus Pro 7700/7710/9700/9710

Printer Parts

Front section

1. Adapter holder
Fix the roll paper when setting the roll paper.
2. Roll paper cover
Open the roll paper cover when you set or remove the
roll paper.
3. Control panel
The control panel consists of buttons, lights, and a
liquid crystal display (LCD).
4. Front cover
Open the front cover when you remove jammed paper
and clean the inside of the printer.
5. Paper basket
Receives the ejected paper.
6. Paper guides
Use the paper guides to lead the paper for feeding
forward or backward.
7. Ink cover
Open the ink cover when installing the ink cartridges.
It slightly opens when you push the
the printer's control panel.
8. Manual box
Place the manual in here. You can set it either on the
left or right side of the stand.
User's Guide
Introduction

Rear section

1. Maintenance tanks
The tank where the waste ink goes into. There are two
maintenance tanks on both sides of Epson Stylus Pro
9700/9710. There is one maintenance tank on the
right side of Epson Stylus Pro 7700/7710.
2. USB interface connector
Connects the computer and printer with a USB
interface cable.
3. Option interface connector (only for Epson Stylus
Pro 9700/9710)
Connects the printer and optional Auto Take-up Reel
Unit with a cable.
4. Network interface connector
Connects the printer to the network with a network
interface cable.
5. AC inlet
Plug the power cord.
button on
10