Front View Of The 8 X 2.5-Inch Drive System; Front View Of The 12 X 3.5-Inch Drive System; Features Available On The Front Of The System; Left Control Panel - Dell EMC PowerEdge R7525 Installation And Service Manual

Figure 3. Front view of the 8 x 2.5-inch drive system
Figure 4. Front view of the 12 x 3.5-inch drive system
Table 1. Features available on the front of the system
Item Ports, panels, and slots Icon
1

Left control panel

2 Drive
3 Right control panel
4 Information tag
16 System overview
N/A
N/A
N/A
Description
Contains the system health, system ID, status LED, and the iDRAC
Quick Sync 2 (wireless) indicator.
NOTE: The iDRAC Quick Sync 2 indicator is available only
on certain configurations.
• Status LED: Enables you to identify any failed hardware
components. There are up to five status LEDs and an overall
system health LED (Chassis health and system ID) bar. For more
information, see the Status LED indicators section.
• Quick Sync 2 (wireless): Indicates a Quick Sync enabled system.
The Quick Sync feature is optional. This feature allows
management of the system by using mobile devices called as
OpenManage Mobile (OMM) feature. Using iDRAC Quick Sync 2
with OpenManage Mobile (OMM) aggregates hardware or
firmware inventory and various system level diagnostic and error
information that can be used in troubleshooting the system. For
more information, see the iDRAC User's Guide available at
https://www.dell.com/idracmanuals
Enables you to install drives that are supported on your system. For
more information about drives, see the
Contains the power button, USB port, iDRAC Direct micro port, and
the iDRAC Direct status LED.
The Information tag is a slide-out label panel that contains system
information such as Service Tag, NIC, MAC address, and so on. If
you have opted for the secure default access to iDRAC, the
Information tag also contains the iDRAC secure default password.
Drives section.