Table of Contents
Advertisement
Left control panel view
Figure 6. Left control panel without optional iDRAC Quick Sync 2 indicator
Figure 7. Left control panel with optional iDRAC Quick Sync 2 indicator
Table 3. Left control panel
Item
Indicator, button, or
connector
1
Status LED indicators
System health and system
2
ID indicator
iDRAC Quick Sync 2
3
wireless indicator (optional)
NOTE:
For more information about the indicator codes, see the
18
System overview
Icon
Description
N/A
Indicates the status of the system. For more information, see the
Status LED indicators
Indicates the system health. For more information, see the
health and system ID indicator codes
Indicates if the iDRAC Quick Sync 2 wireless option is activated. The
Quick Sync 2 feature allows management of the system using mobile
devices. This feature aggregates hardware/firmware inventory and
various system level diagnostic/error information that can be used in
troubleshooting the system. You can access system inventory, Dell
Lifecycle Controller logs or system logs, system health status, and
also configure iDRAC, BIOS, and networking parameters. You can
also launch the virtual Keyboard, Video, and Mouse (KVM) viewer
and virtual Kernel-based Virtual Machine (KVM), on a supported
mobile device. For more information, see the Integrated Dell Remote
Access Controller User's Guide at
section.
System diagnostics and indicator codes
System
section.
www.dell.com/poweredgemanuals
section.
Advertisement
Table of Contents
