Waters Xevo TQ MS Operator And Maintenance Manual page 147

C
External Connections
This appendix describes the mass spectrometer's external connections.
Contents
Topic
Mass spectrometer external wiring and vacuum connections
Connecting the Varian oil-filled roughing pump
Connecting the Edwards oil-free roughing pump
Connecting to the nitrogen gas supply
Connecting to the collision cell gas supply
Connecting the nitrogen exhaust line
Connecting the liquid waste line
Connecting the workstation
Connecting Ethernet cables
Input/output signal connectors
Connecting to the electricity source
The mass spectrometer is heavy. To avoid injury, use
Warning:
suitable machinery and the supplied harness to lift it.
Caution:
• Contact Waters Technical Service before moving the
instrument.
• If you must transport the mass spectrometer, or remove it
from service, contact Waters Technical Service for
recommended cleaning, flushing, and packaging procedures.
See "Troubleshooting with Connections Insight" on page 4-5.
Page
C-2
C-3
C-8
C-13
C-15
C-16
C-19
C-21
C-22
C-22
C-28
C-1