Table of Contents
Advertisement
3-7 AUTO RESET SHANK AND SHOVEL INSTALLATION
3-7.1
Attach each shank assembly to each
clamp assembly using 3/4-10 x 4 hex head
cap screws and hex lock nuts.
3-7.2
Install 2 x 1 x 18 spikes or 1/2 x 4 x 26
twisted shovels onto shanks as follows:
a. Connect 2 x 1 x 18 spike to each shank us-
ing 1/2-13 x 3 hex head cap screws, flat
washers, and heavy hex nuts (See Figure
3-6).
b. Connect 1/2 x 4 x 26 twisted shovels to
each shank using 1/2-13 x 3 plow bolts, flat
washers, and heavy hex nuts. See Figures
2-1 - 2-10 for recommended locations of
right hand and left hand shovels.
IMPORTANT
RIGHT AND LEFT TWISTED SHOVELS ARE
DETERMINED BY DIRECTION OF DIRT FLOW
WHEN FACING THE DIRECTION OF TRAVEL.
3-13
Advertisement
Table of Contents
