Table of Contents
Advertisement
Auto Reset Shank and Shovel
Installation
1. Attach each 1-1/4 x 4 bolt-in shank to each clamp
assembly using 3/4-10 x 4 hex head cap screw and
hex lock nut in the top hole and 5/8-11 x 3-3/4 hex
head cap screw, 5/8 x 3/4 x 1-1/4 connex bushing,
and hex lock nut in the second hole (See
Figure 3-6.)
2. Connect subsoiler points to each shank using 3/8 x 2
spring slotted pins.
ASSEMBLY INSTRUCTIONS
3-13
Advertisement
Table of Contents
