Table of Contents
Advertisement
4-4.1
The hydraulic lift system contains cylin-
ders plumbed together. It is important that
the cylinders be connected in the proper se-
ries for the lift system to operate correctly.
1-1/2 x 16 TRANSPORT
LOCKOUT
L PIN
2110-translockon
Figure 4-2 Installed Transport Locks
4-4.2
1/8 HAIR PIN
2110-translockoff
The hydraulic system is not filled with oil
and should be purged of air before transport-
ing and field operations. Carefully hitch the
Coulter Chisel to the tractor and connect the
hydraulic lift hoses. Check to make sure the
tractor hydraulic reservoir is full of the manu-
facturer's recommended oil. Slowly raise the
machine. With all cylinders fully extended re-
move the 1-1/2 X 16 transport lockouts (See
Figure 4-2). Store transport lockouts as
shown in Figure 4-3. Lower and raise the
unit to verify that cylinders are working simul-
taneously throughout the stroke. Do not
loosen any hoses or fittings. Recheck tractor
reservoir to make sure it is within operating
limits.
1-1/2 X 16 TRANSPORT
LOCKOUT
L PIN
Figure 4-3 Stored Transport Locks
4-3
Advertisement
Table of Contents
