Auto Reset Shank And Shovel Installation - Landoll 2130 Operator's Manual

3-8 AUTO RESET SHANK AND SHOVEL INSTALLATION

3-8.1 Install 2 x 1 x 18 spikes or 1/2 x 4 x 26
twisted shovels onto shanks as follows:
a. Connect 2 x 1 x 18 spike to each shank us-
ing 1/2-13 x 3 hex head cap screws, flat
washers, and heavy hex nuts (See Figure
3-6).
b. Connect 1/2 x 4 x 26 twisted shovels to
each shank using 1/2-13 x 3 plow bolts, flat
washers, and heavy hex nuts. See Figures
2-1 - 2-14 for proper locations of right
hand and left hand shovels.
3-8.2 Attach each shank assembly to each
clamp assembly using 3/4-10 x 4 hex head
cap screws and hex lock nuts. Be sure that
twisted shovels are placed correctly accord-
ing to Figures 2-1 - 2-14.
3-13