Set Up Cisco Unified Communications Manager Features - Cisco Unified IP Phone 8941 Administration Manual

Set Up Cisco Unified Communications Manager Features

Feature
PickUp
Group PickUp
Other PickUp
Malicious Call ID
QRT
Hunt Group
Intercom
Mobility
Privacy
Call Back
Video
Shared Line

Set Up Cisco Unified Communications Manager Features

Cisco Unified Communications Manager Administration allows you to set some product-specific configuration
parameters for Cisco IP Phones.
Procedure
Step 1 In Cisco Unified Communications Manager Administration, choose one of the following windows:
• Device > Phone (Phone Configuration window) Product Specific Configuration portion of window
• Device > Device Settings > Common Phone Profile (Common Phone Profile Configuration window)
• System > Enterprise Phone Configuration (Enterprise Phone Configuration window)
Step 2 Click the ? button in Cisco Unified Communications Manager Administration for descriptions of the parameters.
Step 3 When you set the parameters, check the Override Common Settings check box for each setting that you
wish to update.
If you do not check this box, the corresponding parameter setting does not take effect.
If you set the parameters in the three configuration windows, the setting takes precedence in the following
order:
Cisco Unified IP Phone 8941 and 8945 Administration Guide for Cisco Unified Communications Manager 10.0
(SCCP and SIP)
54
Supported
No
No
No
No
No
No
No
No
No
No
Yes
Yes
Notes
The softkey causes no action.
The softkey causes no action.
The softkey causes no action.
The softkey causes no action.
The softkey causes no action.
The softkey causes no action.
The softkey causes no action.
The softkey causes no action.
The softkey causes no action.
The Call Back softkey does not
display.