Cisco Unified IP Phone 8941 Administration Manual page 170

Cisco IP Phone Web Page
Item
DSCP for
Configuration
DSCP for
Services
Security Mode
Web Access
Enabled
Span to PC
Port
PC VLAN
LLDP-MED:
Switch Port
LLDP Power
Priority
LLDP Asset
ID
CDP: PC Port
Cisco Unified IP Phone 8941 and 8945 Administration Guide for Cisco Unified Communications Manager 10.0
(SCCP and SIP)
156
Description
DSCP IP classification for any phone configuration transfer.
DSCP IP classification for phone-based services.
Displays the security mode that is set for the phone.
Indicates whether web access is enabled (Yes) or disabled (No) for the phone.
Indicates whether the phone will forward packets transmitted and received on the network
port to the access port.
VLAN used to identify and remove 802.1P/Q tags from packets sent to the PC.
Indicates whether Link Layer Discovery Protocol Media Endpoint Discovery (LLDP-MED)
is enabled on the switch port.
Advertises the phone's power priority to the switch, enabling the switch to appropriately
provide power to the phones. Settings include:
• Unknown (default)
• Low
• High
• Critical
Identifies the asset ID assigned to the phone for inventory management.
Indicates whether CDP is supported on the PC port (default is enabled).
Enable CDP on the PC port when Cisco VT Advantage/Unified Video Advantage (CVTA)
is connected to the PC port. CVTA does not work without CDP interaction with the phone.
When CDP is disabled in Cisco Unified Communications Manager, a warning is displayed,
indicating that disabling CDP on the PC port prevents CVTA from working.
The current PC and switch port CDP values are shown on the Settings menu.