Cisco Unified Ip Phones Deployment; Cisco Unified Ip Phones Setup In Cisco Unified Communications Manager; Set Up Cisco Unified Sip Phone 3905 In Cisco Unified Communications Manager - Cisco 3905 Administration Manual

Cisco Unified IP Phone

Cisco Unified IP Phones Deployment

When deploying a new IP telephony system, system administrators and network administrators must complete
several initial configuration tasks to prepare the network for IP telephony service. For information and a
checklist for setting up and configuring a Cisco IP telephony network, go to the "System Configuration
Overview" chapter in Cisco Unified Communications Manager System Guide.
After you have set up the IP telephony system and configured system-wide features in Cisco Unified
Communications Manager, you can add IP phones to the system.

Cisco Unified IP Phones Setup in Cisco Unified Communications Manager

To add phones to the Cisco Unified Communications Manager database, you can use:
• Auto-registration - Not supported if Cisco Unified Communications Manager is operating in mixed
• Cisco Unified Communications Manager Administration
• Bulk Administration Tool (BAT)
• BAT and the Tool for Auto-Registered Phones Support (TAPS)
For general information about configuring phones in Cisco Unified Communications Manager, refer to the
following documentation:
• "Cisco Unified IP Phones" chapter in Cisco Unified Communications Manager System Guide
• "Cisco Unified IP Phone Configuration" chapter in Cisco Unified Communications Manager
• "Autoregistration Configuration" chapter in Cisco Unified Communications Manager Administration
Related Topics
Cisco Unified Communications Manager Phone Addition Methods, on page 26

Set up Cisco Unified SIP Phone 3905 in Cisco Unified Communications Manager

The following list provides an overview and checklist of configuration tasks for the Cisco Unified SIP Phone
3905 in Cisco Unified Communications Manager Administration. The list presents a suggested order to guide
you through the phone configuration process. Some tasks are optional, depending on your system and user
needs. For detailed procedures and information, refer to the sources in the list.
Procedure
Step 1 Gather the following information about the phone:
• Phone Model
• MAC address
mode.
Administration Guide
Guide
Cisco Unified SIP Phone 3905 Administration Guide for Cisco Unified Communications Manager 8.6 (SIP)
Cisco Unified IP Phones Deployment
15