Feature Support By Protocol - Cisco Unified IP Phone 8941 Administration Manual

Feature Support by Protocol

Feature Support by Protocol

This section provides information about feature support for the Cisco Unified IP Phones 8941 and 8945 using
the SCCP or SIP protocol with Cisco Unified Communications Manager Release 9.0 or later.
The table provides a high-level overview of calling features and their support by protocol. This table focuses
primarily on end-user calling features and is not intended to represent a comprehensive listing of all available
phone features. For details about user interface differences and feature use, refer to the Cisco Unified IP Phone
8941 and 8945 User Guide for Cisco Unified Communications Manager (SCCP and SIP).
The guide is available at this URL:
http://www.cisco.com/en/US/products/ps10451/tsd_products_support_series_home.html
The specific sections that describe the features in the user guide are referenced in the following table.
Table 15: Cisco Unified IP Phones 8941 and 8945 Feature Support by Protocol
Features
Calling Features
Abbreviated Dialing
Agent Greeting
Assisted Directed
Call Park
Audible Message
Waiting Indicator
(AMWI)
Audio Only Lock
Icon
Auto Answer
Auto-pickup
Automatic Port
Synchronization
Bandwidth
Management
Enhancement
Barge
Block external to
external transfer
Cisco Unified IP Phone 8941 and 8945 Administration Guide for Cisco Unified Communications Manager 10.0
(SCCP and SIP)
108
Protocol: SCCP Protocol: SIP
Supported Supported
Supported Supported
Not supported Supported
Supported Supported
Supported Supported
Supported Supported
Supported Supported
Supported Supported
Supported Supported
Supported Supported
Supported Supported
For more information, see the following chapter
and section in the user guide
Calling Features, Speed Dial
Calling Features, Agent Greeting
Calling Features, Call Park
Voice Messages, Check for voice messages
Calling features, Video Calls and Security
Calling features, Auto Answer
Calling features, Video calls
Calling features, Barge