Modify Phone Button Template For Pab Or Fast Dial; Set Up Softkey Template - Cisco Unified IP Phone 8941 Administration Manual

Note

Modify Phone Button Template for PAB or Fast Dial

You can modify a phone button template to associate a service URL with a programmable button. Doing so
provides users with single-button access to the PAB and Speed Dials. Before you modify the phone button
template, you must configure PAB or Speed Dials as an IP Phone service.
For more information about IP Phone services and configuring line buttons, see the documentation for your
particular Cisco Unified Communications Manager release.
Procedure
Step 1 From Cisco Unified Communications Manager Administration, choose Device > Device Settings > Phone
Button Template.
Step 2 Click Find.
Step 3
Select the phone model.
Step 4 Select Copy, enter a name for the new template, and then select Save.
The Phone Button Template Configuration window opens.
Step 5
Identify the button that you would like to assign, and select Service URL from the Features drop-down list
that associates with the line.
Step 6 Select Save to create a new phone button template that uses the service URL.
Step 7
Choose Device > Phone and open the Phone Configuration window for the phone.
Step 8 Select the new phone button template from the Phone Button Template drop-down list.
Step 9 Select Save to store the change and then select Apply Config to implement the change.
The phone user can now access the Self Care Portal and associate the service with a button on the phone.

Set Up Softkey Template

Using Cisco Unified Communications Manager Administration, you can associate up to 18 softkeys with
applications that are supported by the Cisco Unified IP Phone 8941 and 8945. Cisco Unified Communications
Manager support the Standard User and Standard Feature softkey template.
An application that supports softkeys can have one or more standard softkey templates associated with it. You
can modify a standard softkey template by making a copy of it, giving it a new name, and making updates to
that copied softkey template. You can also modify a nonstandard softkey template.
The Cisco Unified IP Phones do not support all the softkeys that are configurable in Softkey Template
Configuration on Cisco Unified Communications Manager Administration. Cisco Unified Communications
Manager allows you to enable or disable some softkeys in the control policy configuration settings, but the
If you change the service URL, remove an IP phone service parameter, or change the name of a phone
service parameter for a phone service to which users are subscribed, you must click Update
Subscriptions to update all currently subscribed users with the changes, or users must resubscribe
to the service to rebuild the correct URL.
Cisco Unified IP Phone 8941 and 8945 Administration Guide for Cisco Unified Communications Manager 10.0 (SCCP

Set Up Softkey Template

and SIP)
117