Cisco Unified IP Phone 8941 Administration Manual page 133

Feature Configurable softkeys in
the Softkey Template
configuration
Hunt Group HLog (HLog)
Join Join (Join)
Malicious Call Toggle Malicious Call
Identification Identification (MCID)
Meet Me Meet Me (MeetMe)
Mobile Connect Mobility (Mobility)
New Call New Call (NewCall)
Other Pickup Other Pickup (oPickup)
PLK Support for Queue Status
Queue Statistics
Quality Reporting Quality Reporting Tool
Tool (QRT)
Redial Redial (Redial)
Remove Last Remove Last Conference
Conference Participant (Remove)
Participant
Resume Resume (Resume)
Select Select (Select)
Speed Dial Abbreviated Dial
(AbbrDial)
Transfer Direct Transfer (DirTrfr)
Cisco Unified IP Phone 8941 and 8945 Administration Guide for Cisco Unified Communications Manager 10.0 (SCCP
Supported as a Notes
softkey on Cisco
Unified IP Phone 8941
and 8945
Yes Configure Hunt Group as a
programmable feature button.
No —
Yes Configure Malicious Call
Identification as a programmable
feature button or as a softkey.
Yes —
Yes Configure Mobile Connect as a
softkey.
Yes Phone displays New Call.
Yes —
Yes —
Yes Configure Quality Reporting Tool as
a programmable feature button or as a
softkey.
No —
Yes Phone displays Remove when a
participant is selected.
Yes —
No —
Yes Phone displays SpeedDial.
Yes Transfer is a dedicated button.
Configure transfer (Direct Transfer
policy) in the Product Specific
Configuration Layout section in Phone
Configuration.
Set Up Softkey Template
and SIP)
119