Tftp Server - Cisco Unified IP Phone 8941 Administration Manual

Table 8: IPv4 Setup Menu Options
Option Description
DHCP Indicates whether the phone has DHCP
enabled or disabled.
When DHCP is enabled, the DHCP server
assigns the phone an IP address. When DHCP
is disabled, you must manually assign an IP
address to the phone.
IP Address Internet Protocol (IP) address of the phone.
If you assign an IP address with this option,
you must also assign a subnet mask and default
router. See the Subnet Mask and Default
Router options in this table.
Subnet Mask Subnet mask used by the phone.
Default Router 1 Default router used by the phone (Default
Router 1).
DNS Server 1 Primary Domain Name System (DNS) server
(DNS Server 1).
Alternate TFTP Indicates whether the phone is using an
alternative TFTP server.
Secondary Load Server A local server or router used by the phone,
instead of a designated TFTP server.

TFTP Server 1

Primary Trivial File Transfer Protocol (TFTP)
server used by the phone. If you are not using
DHCP in your network and you want to
change this server, you must use the TFTP
Server 1 option.
If you set the Alternate TFTP option to yes,
you must enter a nonzero value for the TFTP
Server 1 option.
TFTP Server 2 Optional backup TFTP server that the phone
uses if the primary TFTP server is unavailable.
DHCP Address Released Releases the IP address assigned by DHCP.
Cisco Unified IP Phone 8941 and 8945 Administration Guide for Cisco Unified Communications Manager 10.0 (SCCP
Configure Network Settings
To change
Set DHCP Field, on page 37
Set IP Address Field, on page
38
Set Subnet Mask Field, on page
38
Set Default Router Field, on page
38
Set DNS Server Fields, on page
39
Set Alternate TFTP Field, on
page 39
Set Secondary Load Server, on
page 40
Set TFTP Server 1 Field, on page
39
Set TFTP Server 2 Field, on page
40
Set DHCP Address Released
Field, on page 40
and SIP)
35