Control Phone Web Page Access - Cisco Unified IP Phone 8941 Administration Manual

Control Phone Web Page Access

Feature
Video Mode
Command
For more information, see the Cisco Unified Communications Manager Administration Guide, "Softkey
Template Configuration" chapter, and the Cisco Unified Communications Manager System Guide, "Softkey
Template" chapter.
Procedure
Step 1
To configure softkey templates, in Cisco Unified Communications Manager Administration, select Device
> Device Settings > Softkey Template.
Step 2 To assign a softkey template to a phone, select Device > Phone, and use the Softkey Template field.

Control Phone Web Page Access

For security purposes, access to the phone web pages is disabled by default. This practice prevents access to
the phone web pages and the Cisco Unified Communications Self Care Portal.
Some features, such as Cisco Quality Report Tool, do not function properly without access to the phone
Note
web pages. Disabling web access also affects any serviceability application that relies on web access, such
as CiscoWorks.
Procedure
Step 1 In Cisco Unified Communications Manager Administration, choose Device > Phone.
Step 2
Specify the criteria to find the phone and select Find, or select Find to display a list of all phones.
Step 3 Select the device name to open the Phone Configuration window for the device.
Step 4 Scroll to the Product Specific Configuration area.
Step 5 To enable access, from the Web Access drop-down list, choose Enabled.
Step 6
To disable access, from the Web Access drop-down list, choose Disabled.
Step 7 Select Save.
Cisco Unified IP Phone 8941 and 8945 Administration Guide for Cisco Unified Communications Manager 10.0
(SCCP and SIP)
120
Configurable softkeys in Supported as a
the Softkey Template softkey on Cisco
configuration Unified IP Phone 8941
and 8945
Video Mode Command No
(VidMode)
Notes
—