Cisco Unified IP Phone 8941 Administration Manual page 67

Feature
Call Forward All
Speed Dial
Service URL Programmable Line
Key
To Voicemail (iDivert)
Line Filters
Park Monitoring
Barge
Enhanced Message Waiting
Indication
Directed Call Park
BLF (Line status)
Hold Reversion
Remote Hold
Meet Me
Cisco Unified IP Phone 8941 and 8945 Administration Guide for Cisco Unified Communications Manager 10.0 (SCCP
Supported
Yes
No
Yes
No
Partial
No
No
No
No
Yes
No
No
No
Survivable Remote Site Telephony
Notes
Forward state is only available on
the phone that sets the forward
because there are no shared line
appearances in SRST mode. The
Call Forward All settings are not
preserved on failover to SRST from
the Cisco Unified Communications
Manager, or from SRST fail-back
to the Communications Manager.
Any original Call Forward All still
active on the Communications
Manager should be indicated when
the device reconnects to the
Communications Manager after
failover.
The iDivert softkey does not
display.
Lines are supported but cannot be
shared.
The Park softkey does not display.
User sees the message That
feature is not
currently available.
Message count badges do not
appear on the phone screen.
Only the Message Waiting icon
displays.
The softkey does not display.
Calls remain on hold indefinitely.
Calls appear as Local Hold calls.
The Meet Me softkey does not
display.
and SIP)
53