Cisco Unified IP Phone 8941 Administration Manual page 108

Telephony Features
Feature
Detect Unified CM Connection
Failure
Device Invoked Recording
Direct Transfer
Directed Call Park
Directed Call Pickup
Distinctive Ring
Do Not Disturb (DND)
Electronic Hookswitch
Enhanced DeviceTLInfo Alarm
Cisco Unified IP Phone 8941 and 8945 Administration Guide for Cisco Unified Communications Manager 10.0
(SCCP and SIP)
94
Description
Determines the sensitivity that the phone has for detecting a connection failure to Cisco Unified
Communications Manager (Unified CM).
See Survivable Remote Site Telephony, on page 51
Provides end users with the ability to record their telephone calls using a button.
In addition, you may continue to record telephone calls using the CTI User Interface.
See Enable Device Invoked Recording, on page
Allows users to connect two calls to each other (without remaining on the line).
See the Cisco Unified Communications Manager System Guide, "Cisco Unified IP Phone"
chapter.
Allows a user to transfer an active call to an available directed call park number that the user
dials or speed dials.
A Call Park BLF button indicates whether a directed call park number is occupied and provides
speed-dial access to the directed call park number.
If you implement Directed Call Park, avoid configuring the Park softkey. This prevents
Note
users from confusing the Call Park and Directed Call Park features.
See the Cisco Unified Communications Manager Features and Services Guide, "Call Park
and Directed Call Park" chapter.
Allows a user to answer a call that is ringing on a particular directory number.
See the Cisco Unified Communications Manager Features and Services Guide, "Call Pickup"
chapter.
Users can customize how their phone indicates an incoming call and a new voice mail message.
See the Cisco Unified Communications Manager Features and Services Guide, "Call Pickup"
chapter.
When DND is turned on, audible or visual notifications do not occur for an incoming call.
See Set Up Do Not Disturb, on page
Enables users to remotely control off-hook, on-hook, and ring indication functionality from
a wireless analog headset connected to the phone analog headset port.
See Wireless Headset Using Headset Port, on page
Provides improved CTL/ITL status to the Cisco Unified Communications Manager using the
DeviceTLInfo alarm if the phone is unregistered and the CTL/ITL file is installed or updated.
125.
124.
65.